Home

Recent Posts

The Best Tire Chains in the Market: Choosing the Right Product

Written by Chris in Auto Parts,Cars,Reviews

Best Tire Chains

Winter brings a lot of challenges for many people. Aside from the chilling temperature, it also becomes harder to drive. Snow on the ground will make the driving conditions different, and there are risks that are involved. With this, there is one thing that can help – the use of the best tire chains.

If you are looking for tire chains to use, you will probably be overwhelmed by the abundance of options that are available. This, however, should not be an excuse for you to pick just any product. In the rest of this post, learn about some important things that will help you to make the right decision. We will identify five of the best products that you can consider.

What is a Tire Chain?

Also called snow chains, they can prove to be handy during the winter months, making it easier and safer for you to drive around. They will be installed around the tire, and their primary purpose is to improve traction. When there is snow or ice on the surface, the tire may not have a strong grip on the surface, which is exactly the reason why the use of chains is a good idea.

These chains are often available in pairs. You have to figure out which one is suited for your tire, as their sizes may vary. The styles can also be different, more of which will be tackled later on. While using tire chains can be beneficial in terms of traction, it should be noted that there can be problems when it comes to fuel efficiency and speed.

Types of Tire Chains

In your search for the best tire chains, the first thing that you have to do is to think about what specific type is needed. In this case, the following are the choices that you have:

AD

  • Entry Level: If you live in an area where there is occasional snow, this type will be more than enough.
  • Standard: This is the right choice if there is regular snow or ice in your place.
  • Premium: If there is snow daily and if you want to enjoy optimal traction, this should be on the top of your list.
  • Alternative Traction: You should choose this if you will be driving shortly in an area with snow. This is also the right choice if you have a car that has a low profile.

Aside from the intended use, the best tire chains can also be classified based on their configuration.

  • Z Chain: If you are looking for simplicity, this is an option that may work. Its installation is quick and hassle-free. They are compatible with a wide array of tires and already include rubber tighteners.
  • Radial Chain: If you are looking for optimal stopping and starting, this can prove to be a promising option. It comes with an all-steel construction, which will be instrumental of its durability.

Essential Factors to Consider When Buying

As you try to evaluate how one product is different from the other, you should take into account the factors that will be mentioned below:

  • Size: One of the most important considerations is fitment. This means that its size should be appropriate for the size of your tires. If the chains are too big, this can end up banging on the surface of your car and will be unable to provide the traction that is required. If it is too small, on the other hand, it won’t fit at all.
  • Installation: It is also important to look for one that can be installed in a snap. You do not the help of a pro to complete its assembly. The product should be easy to assemble. To add, it will also be good if there are comprehensive instructions from the manufacturer, making it easy for you to figure out how the installation can be completed.
  • Price: A lot of people will probably decide on the basis of price. Many may be tempted to choose one product only because it comes with a cheap price. This is one thing that you should not do. Quality should be more important. It should not matter even if it is expensive if it is tantamount to enjoying the best within the product category.
  • Link Pattern: Different tire chains can have different patterns, each with their respective purpose and benefits. If you want one that is designed specifically for slippery ground, diagonal link is a good choice. On the other hand, if durability and grip are important considerations, choose square link. Meanwhile, for on and off-road driving, ladderlike links will perform best.
  • Durability: The best tire chains should be durable, which means that they must remain in their tip-top condition even through the years. Even if it is used frequently, it should not be easily prone to wear and tear. Otherwise, you will only be wasting your money and worse, your safety will be compromised.
  • Reviews: If you are having a hard time reaching a decision, you can consult with the opinions of other people. A lot have been generous enough to go online and read reviews. This will be a good way to weigh the pros and cons of the possibilities.

Top Picks for the Best Tire Chains

Product (Amazon Links)Size  

Security Chain Company SZ115 Super Z6 Cable Tire Chain for Passenger Cars, Pickups, and SUVs – Set of 2

SZ115

Review

Peerless 0232605 Auto-Trac Light Truck/SUV Tire Traction Chain – Set of 2

Series 2300 – 232605

Review

Glacier 1038 Passenger Cable Tire Chain – Set of 2

1038

Review

KONIG 12mm XG12 Pro Deluxe SUV/Crossover Snow Chain, Size 245 (Sold in pairs)

245

Review

Quality Chain Cobra Cable Passenger Snow Traction Tire Chains (1046)

1046

Review

If you are having a hard time trying to figure out which one is the best, this section will identify five of the products that can provide the best bang for the buck.

1. Security Chain Company SZ115 Super Z6 Cable Tire Chain for Passenger Cars, Pickups, and SUVs, Set of 2

AD

Among others, one reason why this is above many others within the competition is the fact that it is effortless to install. You do not need to move the car. Within a short time, the installation will be done.

The versatility of this tire chain is another thing that makes this an exceptional choice. This is basically because you can use it not only for cars, but even for trucks and SUVs. Regardless of where it will be used, you can expect the same optimal performance, especially when it comes to traction.

In terms of the materials that are used, this can also prove to be impressive. For instance, it comes with traction coils that are made from alloy steel. This material significantly improves the lifespan of the tire chain.

Lastly, its size is also exceptional. This means that you can use it even with limited clearance. In fact, you will need only .25 inch of clearance, which is significantly lesser compared to most of the traditional options in the market.

Pros:

  • Installation can be accomplished in a snap
  • Comes with a rubber tightener
  • Significantly improves traction

Cons:

  • May not be good for uphill driving
  • Can easily break

2. Peerless 0232605 Auto-Trac Light Truck/SUV Tire Traction Chain – Set of 2

AD

While this model comes with an abundance of features, one that should be noted is the Automatic Tightening and Centering System. The latter minimizes the effort required on your end to ensure its reliability. As you drive, the chains will adjust automatically.

The snug fit of the chain is another great thing about this product. This means that once the chain has been positioned, regardless of the movement of the tires, the chain will not be displaced. It will also automatically retighten on its own.

It is also worth emphasizing that it comes with low-mass D-cross section. This is an intelligent feature that reduces impact. With this, you can expect that it will stay durable even after several years of use.

Lastly, the installation can be accomplished easily. You do not need to exert a lot of effort before you can have it assembled properly. The manufacturer even provides comprehensive instructions to make things a lot easier.

Pros:

  • Easy to install
  • Solid construction
  • Provides great traction

Cons:

  • Tensioners are weak
  • Possible issues with size

3. Glacier 1038 Passenger Cable Tire Chain – Set of 2

AD

Some people are afraid of using tire chains because of the fear that this will void the warranty of their vehicle. This is because some chains can cause external damages to the car, especially in the absence of the right fitment. This is not one thing that you should worry about in the case of this chain.

It is also a good thing that this is a versatile option. The latter is simply because it can be used regardless of whether you have a front or rear-drive vehicle.

The materials that are used in the chain are also worth commending. They are made from low carbon steel that has been case hardened, which is supposed to make it withstand wear and tear. Even the side cables are made in such a way that they will last for an extended period.

The low profile of the tire chain is also a good thing. This is a good way to provide you with a smoother ride. This will also make sure that he chains will not touch the surface of your car. Such is one of the reasons why using this chain will not render your warranty void.

Pros:

  • Easy to install
  • Good even for long drives

Cons:

  • Can be easily prone to scratches
  • There can be problems with retention

4. KONIG 12mm XG12 Pro Deluxe SUV/Crossover Snow Chain, Size 245 (Sold in Pairs)

AD

While there are many things that will make this exceptional, one of the best is the fact that it is self-tensioning and self-adjusting. With this innovative feature, there is no need for you to make adjustments manually. Just drive straight and the tire chain will automatically adjust on its own, making sure that it stays tight and in its proper place.

It is also worth noting that it comes with a special pattern. With this, the chain will offer exceptional traction in a wide array of surfaces. Whether it is slippery or snowy, the chain will make sure that the tires will be on the right path and you will be safe all the time.

Lastly, the manufacturer provides 5-year warranty, which is reflective of the confidence they have in their product. This can also provide you with peace of mind. Within the warranty period, the manufacturer backs the quality of the chains. It will ensure your highest level of satisfaction.

Pros:

  • Exceptional fitment
  • Durable construction
  • Stays snugly fit

Cons:

  • Can create noise

5. Quality Chain Cobra Cable Passenger Snow Traction Tire Chains (1046)

AD

The quality is decent, although not necessarily the best.

You may also love this product because it is lightweight. You can easily stash it in the back of your car. This will not be a significant addition to the gears that you have.

It is also a good thing that it fits in many cars. Take note of the word many. It does not fit all cars, but will be good enough for most. It is best to check the specifications from the manufacturer to be sure that your money will not go into waste.

Pros:

  • Compatible with a wide array of tires
  • Low-profile design

Cons:

  • Can make a loud noise
  • Not as durable as others

Conclusion

Searching for the best tire chains can be overwhelming and challenging. Nonetheless, even if the options are never-ending, you should not be in a rush in making a decision. Consider the things that have been mentioned above and it will make things a lot easier. At all times, do not chose a product only because it comes with a low price. You should look beyond the cost. Make sure that it can offer excellent traction and that it will withstand long-term use.

Top 14 Automotive Tools That Are Essential For Every Car Owner

Written by Chris in Auto Parts,Cars

Automotive Tools

You are driving on the highway or a secluded road on a cold night and at that particular time; your car decides to break down. There is no garage nearby and no one to offer help. Does this situation sound familiar? Every one of us has faced this situation more than once. The best lesson to learn from this situation is to carry automotive tools at all times.

It can be dangerous to get stuck in a situation like that as a car malfunction can increase the chances of an accident. You don’t need to be a mechanic to fix your car, and a small kit of tools can come handy in an emergency like that. The top 14 tools you require are:

1. Life Hammer

Life Hammer

Via: https://forums.nasioc.com/forums/showthread.php?t=491107

This is a very small item, which can be kept near the driver’s seat by attaching it with Velcro or a double sided tape. It allows you to break the window in case of any emergency such as fire, when you are stuck underwater and need to escape.

It can also cut through the fabric of seatbelt to help you escape faster and save your life. Time is of the essence in this situation, and a simple, cheap tool can save your life.

2. Car Buffer

car-polishing

To make sure that your car looks brilliant every time you need to have a car buffer at all times. It can give the perfect finish to your vehicle and restores the appearance to make it look brand new every time. By using a suitable car buffer, it can remove scratches and minor scrapes from the outside layer of your car and give it a polished look. There are two main types of buffers, which are:

  • The pneumatic buffer: it uses air as the main source of power, so you don’t need any other tool to make it work. They are also lightweight.
  • The electrical model: it uses electricity as the key source of power and can be plugged into any standard electrical outlet.

You can also use an auto buffer, hand waxing and high-speed buffer, which supports air or electricity as its power source.

3. Jumper Cables

find-a-genuine-auto-dealer-selling-jumper-cables
  • Getting stranded with a dead battery is the worst nightmare you can have. You need to have jumper cables as automotive tools at all times. You can jump start your car anytime. When using a jumper cable ensure that both the batteries are of similar voltage to avoid the risk of damaging the electrical components.
  • Connect the positive red clamp to the dead battery and the other positive red clamp to the good one. This way, connect the black clamp to the good negative battery and the other black clamp to the metallic part of your engines black. Run it idling for a few minutes and once the car starts to remove the jumper cables. This way, the jumper cables can save your day.

4. Automotive Multimeter

Automotive Multimeter

It is regarded as the most useful automotive tool for electrical diagnosis. These meters are designed for performing many standard and advanced tests on electrical parts before replacing them. So you don’t need to guess anymore if the parts have failed or not and can test the parts with an accurate reading.

5. Tire Chains

Tire Chains

It is very difficult to drive on an icy road or a road full of snow. The risk of slipping and causing an accident is very high. Using tire chains can eliminate this risk Handheld as they are fitted with the tires of the vehicles and provide maximum traction.

Be careful about locking your wheels when you brake and hitting curbs. So driving in the snow won’t be a problem anymore.

6. Grease Gun

Best Grease Gun

It is a common garage tool, which is used for lubrication to apply it through an aperture to a specific point usually on a grease fitting. The channel behind the grease fitting is the one, which needs lubrication. There are three types of a grease gun. They are:

  • Hand powered gun where the grease is automotive from the aperture by back pressure built up. The grease gun applies pressure to a spring mechanism and lubricates it through the aperture.
  • Hand powered gun with no trigger mechanism functions as the grease forces through the aperture by pushing on the butt of the grease gun, and it also slides a piston through the body of the tool.
  • An air-powered gun where the compressed air is directed to the gun by hoses, the air pressure serves as a force to help grease reach the aperture. This air powered gun uses air as the primary source of power, so you don’t need any extra charging equipment for the same.

7. Garage Vacuum

Garage Vacuum

This tool is the most versatile and efficient one to clean your garage properly. Every car owner should have this tool to clean out the mess the mess a car can create. There are two types of garage vacuum, which are hand held garage vacuum and wall-mounted garage vacuum.

  • Handheld garage vacuum is a perfect choice as they are very budget friendly and can do the job very quickly. However, they have a small capacity, which means that it gets frequently emptied if you plan to do an extensive work.
  • Wall-mounted garage vacuum is permanently installed on the wall, which can solve your storage problem and possess a long hose for you to access the inaccessible places. This is a high-quality product, which proves to be a lot handy.

Before buying one, you should take the factors into consideration such as capacity, noise, portability, filter, motor, etc.

8. Multi-Drive Wrench

top automotive tools

Photo Credit: https://www.aliexpress.com/popular/automotive-tool-box.html

We all need a wrench to unbolt screws and nuts, but the main problem we face is the size. Keeping different wrenches or different size of screws is just not possible. A multi-drive wrench can solve all of these problems as it offers the capability to work with different types and sizes of nuts and bolts.

It is also very compact in size so that it won’t take much of your storage space.

9. Speed Charger

Carrying a charger for your car battery can prove to be a lifesaver. It can boost your car’s battery anywhere and anytime you need it. It is fully automatic in operation and has multiple charging modes, which can allow you to charge multiple things at once.

The speed charger can charge a low battery instantly and avoid any obstacles you face and give you a smooth driving experience.

10. Flexible Sockets

Flexible Sockets

Our car engine is always overcrowded and reaching those inaccessible places becomes a difficult task. These flexible sockets let you install and remove bolts where the places are tight. It uses the individual swivel sockets on an air ratchet to give a little more leeway regarding positioning.

They are also very compact, so they don’t need any extra storage; you may invest in the best socket organizer for your car and can help you save your day.

11. Needle Scaler

A needle scaler can blast off the rust and improve the life of your car. It also removes the scale and dirt from your car at 4600 blows per minute. It can give a new and shiny look to your car in no time and at a very minimal effort.

12. Torque with Digital Accuracy

Torque with Digital Accuracy

Via: http://www.ultimategarage.com/shop/images/e306series.jpg

With this era of technology, you don’t need just to guess if the bolts are tight enough or not. If you try to tighten the bolts without a torque wrench, you are risking major damage to your car.

With the LED screen and audible signals the torque wrench shows and stops you when you are done. A loose bolt is an invitation to serious risks to your car and yourself.

13. Pry Tools

car tools

Photo Credit: https://www.yourmechanic.com/article/10-best-brands-for-automotive-tool-sets-by-valerie-johnston_2

A set of pry tools can prove to be handy to every car owner. A small kit of these tools will have all the essentials to remove or fix minor damages to your car. It can also trim pieces and remove small buttons from your car. It can also crack open delicate parts of the car with the utmost ease.

14. Telescoping Mirror and Magnet Set

A telescoping mirror helps you see the parts of the engine, which are inaccessible so that you can see the damage with high accuracy. The telescopic handle lets you pull out to 25 inches, and the screw end lets you swap attachments. The magnets will help you to retrieve lost parts.

You just need to keep a small kit, which can save you lots of extra work and you don’t need to spend loads of money to get it fixed by the mechanic.

The list above gives you an idea of the essentials, which you need to carry in your car or keep in your garage at all times. They can save you a lot of effort, time and money, which will increase the life of your car and also keep it efficient for a long run.

So get these tools as soon as possible, and you will see the changes in your car in no time. If you found this post knowledgeable please share it with others and let us know your views by commenting on it.

How To Save My Car From Evaporative Emission Control System (EECS) Leak?

Written by Chris in Auto Engines,Cars

Evaporative Emission Control System

Whenever we think of automotive emission, we usually think some dirty stuff is coming out of the exhaust pipe. The internal combustion creates CO2 and nitrogen oxide released into the air when we drive. But no one knows there are so many other types of emission that can come out of our car.

They are evaporative emissions, and the gasoline in your fuel tank will slowly evaporate over time. These emissions contribute to air pollution and other health issues to humans. There are things you can prevent your car from evaporative emission control system leak. First, let us see what evaporative emission control system is.

What is an Evaporative Emission Control System?

Evaporative Emission Control System leakage

Photo Credit: http://www.justanswer.com/mercedes/6pbb2-mercedes-benz-sl55-amg-03-sl55-i-m-getting-check.html

The evaporative emission control system is powerful enough to capture raw fuel evaporating from the fuel storage system. The system doesn’t require any maintenance, but faults can turn the check engine light, preventing the vehicle from passing an emission test.

A car has a closed EVAP system, and it immediately captures the fuel tank vapors preventing them from escaping to the atmosphere.

What is EECS Leak?

An evaporation leak in a car is due to the fault in the emission control system, and it functions taking gas fumes from the tank reaching to the atmosphere. When the engine computer recognizes large leak in the control system, the vehicle’s EVAP system will be sealed.

The main purpose is to prevent the gasoline vapors escaping into the atmosphere. The leak in the car is caused due to the fault in the emission control system.

It prevents the smell of fuel reaching inside your vehicle. The fuels we use in our cars consist of more than 150 chemicals, and if we inhale these ingredients, it may cause breathing problem, dizziness, and headache. The evaporated gasoline also causes smog. For these reasons, car makers should install the system in their vehicle to mitigate the gasoline evaporation.

Evaporative Emission Control System leakage

Photo Credit: https://www.youtube.com/watch?v=iNTcP6D32ww

Symptoms of Leak

  • One main symptom of the leak is the check engine light blinking when you are driving. You may also notice a slight fuel odor. Then, you must immediately check the gas cap.
  • Some cars may show a slight drop in gas mileage.

Causes of Leak

  • The common cause of the leak remains the gas cap not closed. If the cap is not closed, the check engine light will blink.
  • Damaged gas cap seal.
  • There can be a leak in the hose system.
  • Other issues can be a defective purge valve, defective leak detection pump, and a faulty vent o-ring seal.
  • Leak in charcoal canister and fuel tank leak.

Is It Safe to Drive with the Leak?

Even it is safe to drive your car with EVAP leak; you shouldn’t drive your vehicle for long. Once you notice the engine light blinking, make sure the gas cap on your car is fastened. If the light is still on, you need professional help to repair the leak.

How the Mechanics Diagnose the Leak?

  • The mechanic will hook up a scan tool to the vehicle’s DLC port and will check for a P0442 code.
  • He will then examine the data associated with the code which will show the circumstances present in the vehicle at the time of a malfunction.
  • He will check for the crack in the fuel tank and charcoal canister.
  • He will inspect the condition and fit of the gas cap and will test the gas cap tester.
  • He will perform a smoke test on the EVAP system in search of smoke that indicates a vapor leak.
  • He will use a scan tool to monitor the tank pressure and to confirm the leak.
  • Then he clears the code and test drive the vehicle.

How to Save your Car from EECS Leak?

The EVAP system is premeditated to trap the fumes of a gas tank. The system contains liquid-vapor separator, fuel tank, and vapor lines to prevent gas from entering the system. EVAP canister has purged valve inside the canister to trap the fumes.

Sometimes, when the car engine operates, the purge valve gets opened up, allowing fresh air to get inside the canister. This force the gas fumes get back inside the engine’s air intake, and then it starts burning inside the engine.

When the system develops a leak due to corrosion, the system starts showing an EVAP leak code on the system. To resolve the problem, you have to find out the leak component and replace it. Some repair needed to fix the problem includes:

Evaporative Emission Control System leakage

Photo Credit: https://clubsciontc.com/forums/diy-install-guides-23/diy-p0442-evaporative-emission-control-system-leak-detected-gas-cap-fix-47954/

  • Replace the fuel tank and the gas cap
  • Replace the charcoal canister and EVAP system lines
  • Replace the vent valves

Qualified technicians are required to diagnose the problem. Commonly the gas cap would be the issue, and if the gas cap is overlooked, you can save time and energy by diagnosing other components. Professional level tools are required to diagnose such leaks in an accurate way.

An advanced live tool can provide access to live data and control on EVAP system. They are helpful in dealing with such leaks. Most leaks are much smaller than eyes can see, so a smoke test has to be performed to find the fuel vapor leaks. A specialized smoke machine will pressurize the fuel system and will add smoke to find the smallest leak.

Gasoline is volatile, and it evaporates quickly. Your car’s fuel can turn from liquid to gas very fast when it is hot outside. This hydrocarbon emission from cars coming through fuel evaporation is not good for the environment. So, you must take preventive measure of leaking the gas from your car. Some things can be done to prevent your vehicle from evaporating gasoline.

  • First, you must make sure the fuel cap is secured tightly. If you don’t have a fuel cap, get one immediately. Fuel can escape from the tank if it is not airtight.
  • Whenever possible, you must park your vehicle in the shade during the summer season. Even though latest cars are equipped with an advanced EVAP system to prevent evaporation from happening, gas will still evaporate from the tank if your vehicle is parked in the sun. Parking in the shade will keep your vehicle cooler and reduce fuel from evaporation.
  • You must try to fill fuel in your vehicle during the early morning or late night. It remains warmer during the afternoon and early evening. This would prevent gas from getting evaporated.
  • To keep the EVAP system operating properly, you must re-install your vehicle’s gas cap immediately after refueling. Addition to that, you must apply for a good rust protection to keep the system line corrosion to a minimum. Make sure you always check the engine lights. If the lights are not kept off, the EVAP system can create problems leading to a major repair cost.

Fuel vapors can emit from your vehicle anytime whenever there is gasoline in the tank. So, if there is a leak even if you are driving the vehicle, the vapors will pollute air within 24 hours. Whenever the engine light blinks, you must expect a leak in your EVAP system. If you face any such situation, it is best to contact a mechanic immediately to have a look of your vehicle.

Must-Read Buyer’s Guide Before Purchasing The Best Cobalt Drill Bit In The United States

Written by Chris in Auto Parts,Reviews

Best Cobalt Drill Bit

Are you looking for an apt drill bit set for domestic use? Or are you willing to replace your current bit set, which is producing too much heat? If you are planning to purchase the best cobalt drill bit set, then consider some factors and specifications, which are described at length in this buyer’s guide.

This will be handy to pick the best cobalt drill bit set out of the rest. Moreover, you will get an idea of the star products that are currently running in the industrial market of cobalt drill bit sets.

What are Cobalt Drill Bits?

There are plenty of bits available in the market for the various surface materials. Some are apt for the metals; some are suitable for wood drilling, whereas some are appropriate for rough and even surfaces as well. Cobalt drill bits are made from steel alloy, which contains 5-8% cobalt.

Normally, the cobalt drill bits are made from M42 and M35 grade cobalt steel. If steel alloy has an amount of 5 percent cobalt, then it is called M35-grade cobalt steel. M42 cobalt steel contains 8 percent of cobalt. The key purpose of adding up the cobalt is to enhance the heat resistance capacity and durability of the bits. The bits gain the property of endurance against the high temperature due to cobalt metal.

How to Buy the Best Cobalt Drill Bit for Yourself?

AD

Consider the below specifications for the best cobalt drill bit before you go for purchase:

  • Material used: Material is the essential factor that affects the selection of the cobalt drill bit. Higher cobalt content in the steel alloy enhances the sturdiness and heat resistivity of the bit.
  • Length: The durability of the bit also depends on the length. As the length of the bit increases, its durability and toughness decrease. All in all, shorter cobalt bits withstand breaking, spinning, and twisting.
  • Size: Make sure you get a variety of sizes before purchasing any drill bit set. The availability of different diameters will make your drill machine work for multiple jobs.
  • Tip point style: Tip style will determine the penetration capacity of the bit through the material. There are many tip styles of drill bits, such as split drill point, V- point, tapered point, brad point, and fish point, available in the market. The 135-degree split point style is most commonly used in cobalt drill bits.

Top 5 Best Cobalt Drill Bits 2017 Market​

Product (Amazon Links)Brand  

Irwin Tools 3018002 Cobalt M-35 Metal Index Drill Bit Set, 29 Piece

Irwin

Review

DEWALT DW1263 14-Piece Cobalt Pilot Point Drill Bit Set

DEWALT

Review

Drill America DWD29J-CO-PC Qualtech 29 Piece

Drill America

Review

Craftsman 9-64085 Professional Cobalt Drill Bit Set, 21 Piece

Craftsman 

Review

Cobalt Drill Bit Set M42 HSS 29pc USA Drills

Drillcraft

Review

Below are the best cobalt drill bits, which are available in the market:

1. Irwin Tools 3018002 Cobalt M-35 Metal Index Drill Bit Set, 29 Piece

AD

Are you looking for a drill, which can penetrate through rough surfaces to its fullest extent? Then Irwin drill bit set is an apt pick to meet your requirement. It is sturdy and strong enough to withstand against the wear and tear effects. Moreover, you can use it in various jobs as it comes in large range of sizes.

Key use of cobalt into M35 steel eliminates the heating problem during the job to some extent. It also enhances the durability and life of the tool. You can effortlessly complete the heavy duty job using Irwin dill bit set. Moreover, the feature of 135 degree split point keeps the drill balanced on the surface during operation.

Main Features

  • The case comes up with 29 pieces of the bits
  • It is made up of M-35 steel with 5% cobalt
  • Highly scratch resistant and has super drilling speed
  • Apex of the bit with the 135 degree split point
  • Size of the bits ranges from 1/16 to ½ inches

Pros

  • It is designed for highly rough metals
  • The use of cobalt increases the efficiency of the cutting edge and lessens the maintenance
  • It also does not produce heat during the operation
  • 135 degree split pointed apex reduces the efforts of the operator when performing the task
  • It can be driven into the rough surfaces with less troublesome
  • It is easy to carry on work places

Cons

  • Few smaller bits can break after certain number of holes
  • You need to oil the bits frequently to avoid the breaking of bits during the operations

2. DEWALT DW1263 14-Piece Cobalt Pilot Point Drill Bit Set

AD

Many a time your drill can not perform the job accurately due to the inapt tip of bit. Well, as the name itself says DEWALT pilot point drill bit set omits the problem of poor grip, spinning and twisting of drill from the rough surfaces. It performs the operation with high accuracy.

Moreover, DEWALT is made from the alloy of steel and superior cobalt, which is normally used for industrial purpose. Hence, it gives the swiftness and sturdiness to the drill bits. You can easily carry the set without any concern of damage as its case is constructed using ABS material.

Main Features

  • Size of the bit ranges from 1/16 to 3/8 inches
  • The bits come up with durable and lasting case consisting of ABS material
  • Skidding rubber lock for the safety of bits
  • Bits are comprised of the alloy of cobalt and stainless steel
  • Apex of bit with 135 degree split point
  • Set contains 14 piece of bits

Pros

  • The certain amount of cobalt in the alloy enhances the durability of the bits
  • Skidding rubber lock keeps tight the case whether the bits are in use or not
  • Apex with 135 degree split point reduces the manoeuvre
  • They can be drilled into wood and metals with ease

Cons

  • These bits have pilot tip, which means you cannot sharpen the tips as possibly we do in regular bits to enhance the life and efficiency of the bit

3. Drill America DWD29J-CO-PC Qualtech 29 Piece

AD

Is your drill producing heat at major extent during job? Are you looking for the better substitute, which can eliminate this issue? Then consider the bellow specification of Drill America DWD29J-CO-PC Qualtech. The glazing of gold oxide over the cobalt steel surface enhances the heat resistance capacity of the tool.

You do not need to make a pilot hole before the starting of the operation as the bits have self- focusing 135 degree split point. These bits are used in large range of machines. There is no concern of bending of drill bits due to the provision of twisted area. It can be used for various duty jobs as it comes in variety of sizes.

Main Features

  • Highly heat and scratch resistant
  • Length of the bit is 29 inches
  • It is made up of cobalt steel with the finishing of gold oxide
  • Apex of bit with 135 degree split point
  • Drill America comes up with plastic case, which has 29 piece of bits
  • Size of the bits ranges from 1/16 to ½ inches
  • Round shank of bit

Pros

  • Use of cobalt steel enhance the life and the efficiency of the bits during the operations
  • Cover of gold oxide increases the heat resistance capacity of the bits
  • It comes up with the size index so you can easily choose an apt bit for the operation
  • There is no need of pilot hole on the rough surfaces due to 135 degree split point

Cons

  • The quality of case material is not much satisfying

4. Craftsman 9-64085 Professional Cobalt Drill Bit Set, 21 Piece

AD

Craftsman 9-64085 Professional Cobalt Drill Bit Set is indeed handy for the heavy duty jobs. If you are dealing with heavy metals and rough surfaces everyday then use of this guy will certainly reduce your efforts during operation. Moreover, the bit set comes with size index so that you can easily pick the suitable size of bit for the operation without getting confused in sizes.

The feature of split point enhances the accuracy during drilling. The bit set is easy to carry as it comes in plastic case. Moreover, you can have many options in sizes of bits. Hence, your tool can perform multiple jobs at once.

Main Features

  • Size of Craftsman ranges from 1/16 to 3/8 inches
  • Set of 21 piece bits come into plastic case
  • Suitable for variety of materials and surfaces
  • Enhanced split point

Pros

  • It is quite handy for the heavy duty jobs where high pressure drill is required
  • It is apt for machines such as hand drill and drill press
  • Its enhanced split point eliminates the concern of pilot hole and makes the bit balanced on the surface
  • It is used for rough surfaces and all sort of metals

Cons

  • The absence of side notch at the end of the bit, which results in insecure grip and need of constant pressure to penetrate through the rough and tough surfaces

5. Cobalt Drill Bit Set M42 HSS 29pc USA Drills

AD

Are you looking for a sturdy drill bit for your drill machines? Are you sick of the twisting of the bits in the middle of operations? Then Cobalt Drill bit set M42 HSS is an apt option to resolve your problem. It is made from superior cobalt M42 grade steel.

It is indeed a valuable product in the industrial market due to its high melting point, durability and enhanced cutting speed. Moreover, its tri-flat shank feature makes the bits stick to the surface. All in all it prevents the bit from the twisting and spinning.

Main Features

  • Use of Premium solid CobaltM42 grade steel with advanced speed into the formation of bit
  • Size of bits ranges from 1/16 to ½ inches
  • Provision of 135° split end point
  • High melting point of 2853 °F
  • Provision of tri-flat shank

Pros

  • Provision of tri-flat shank prevents the bit from twisting from the position
  • Use of M42 cobalt steel enhances the penetrating speed of bit
  • It has highly heat resistance due to the high melting point

Cons

  • The only con is the use of worse material in casing of drill set

What are the Different Types of Cobalt Drill Bits available in the Market?

Below are the types of cobalt drill bits on the basis of their tip style, length and shank style:

1. Twist cobalt bits

Cobalt twist drill bits are used for all sorts of surfaces and materials. This is the most preferable type of cobalt drill bit, which is used for variety of operations. It comes in different sizes to perform multiple jobs. Moreover, the sturdiness of the cobalt twist drill bit enhances with the shorter length of bit.

Hence, there is no concern of breaking or spinning or twisting for the shorter twist bits. Few bits have coatings of gold oxide, bronze oxide to increase the heat resistance capacity of bit.

2. Counter bore cobalt bits

Counter bore cobalt bit has flat bottom with a tiny middle hole, which cuts the surfaces thoroughly. Counter bore cobalt drill bits are used to cover the apex of fastener. These bits are commonly used for the wood and plastic surfaces. They are not suitable for the metals. Moreover, these bits are made from high speed steel and do not have any sort of coatings.

3. Countersink drill bit

These bits are normally used for the drilling in wooden surface. These bits make small pilot hole initially with the help of small middle hole, which pierces the material thoroughly. Moreover, countersink drill bits can sit properly without twisting from the surface due to its tapered fastener head.

4. Cobalt step drill bit

Step drill bits are generally used for the metals. This bit can penetrate up to 0.25 inches inside the metal. You can easily drill various diameters of holes with using a single bit due to its stepped design. Moreover, you can also use step cobalt drill bit for the wood material due to its good penetrating capacity.

You may always combine this tool with other useful tools such as car buffers, which can help in polishing and buffering the car exteriors and anti-corrosion remedy, the grease guns that help in avoiding corrosion process in cars.

There are so many options available for the cobalt drill bit set. Before choosing a cobalt drill bit set, you should keep in mind some factors such as durability, length, availability of the sizes, tip point style, material used into the making of bit, material of case and the endurance of bit against high temperature.

Cobalt Drill Bit Set M42 HSS 29 pc satisfies many qualities at some level, which are described above. It is made from high speed steel M42. Moreover, it comes in variety of sizes so you can use it for multiple jobs. Its tri-flat shank feature prevents the bit from twisting and spinning. Hence, Cobalt Drill Bit Set M42 HSS has good enough features to opt for purchase.

My Headlights Won’t Turn On! What Should I Do?

Written by Chris in Auto Parts,Cars

Headlights Won’t Turn On

There are certain times when the headlights of the car won’t turn on at all. The very first thing that clicks the mind of the user when something like this happens is to stop the car, remove the keys and start it again.

There are times that the headlights of the car still won’t get turn on. When something like this happens, the user or the driver has to remember that there is no point in panicking. Instead, they need to think smartly and get a solution to the problem.

There are certain ways or techniques that one can try to turn on the headlights of the car, and if nothing works then as the last option, they have to take the car to a mechanic.

Before one starts panicking, it is not only important to think of smart ideas to get out of the problem, but it is equally important to know about the reasons behind the problem. In the blog below, there is a mention about everything one needs to know when the headlights of their car won’t turn on.

What causes the Headlights to Stay Off?

According to many people, headlights are the most complicated part of the car. As per the reports, the headlights are very easy to handle if the right diagnosis is made at the right time. In fact, in the new cars, there are adaptive headlights that do not have many failures.

my headlights won't turn on

Photo Credit: https://www.cargurus.com/Cars/Discussion-t41581_ds631199

There are certain reasons that are responsible for the headlights not turning on. Some of the major reasons behind this are as below:

  • Headlight switch
  • Multifunction switch
  • Daytime running light module
  • Light sensor
  • Relay

A solution of problems causing the headlights not turning on

1. Daytime Running Light Module

There are cars that have the daylight running light modules in them that help in turning on the headlights automatically. If this system fails, then there are chances of the headlights not turning on. If this is the case, then you have to try to set the parking brakes again and check whether the headlights turn on or off.

This is because the parking brakes help in disabling the daytime running lights. If this is the exact case with your headlights of the car, then the only thing you can do is to remove the daytime running light module. By removing the daytime light module, there are high chances that your headlights of the car will turn on automatically again.

2. Bad Relay

my headlights won't turn on

Photo Credit: https://www.youtube.com/watch?v=5eZBpq4Knro

If your headlights of the car won’t turn at all even if you remove the daytime running module, then you can try inspecting the relay inside the headlights. To inspect the relay is very much easy as there are many circuits that share the same type of relay.

If this happens to you, then you have to remove the headlight relay and then swap it with a better headlight relay. If you do so, there are high chances that your headlights will turn on again. If the relay is in bad condition, then you just have to change the headlights relay, and they will turn on again.

3. Multifunction Switch

If the headlights of the car do not turn on even after changing the headlight relay, then there are chances that there is a possibility of a multifunction switch or bad headlight switch. To inspect and diagnose the multifunction switch problem is difficult in comparison to other failures.

You can simply check and inspect this particular failure by the removal of the component and check if there is any other physical damage.

For instance, if the headlight of the car gets short internally there are chances that the switch gets hot enough to either crack or meltdown. Also, the bad headlight switch getting short there are chances that the plastic housing will burn down or the electrical connections will burn down.

There are many possibilities that you will not be able to recognize the failure of the multifunction switch. If you are not able to inspect this failure, then the best thing that you can do is to disable the headlights. For disabling the headlights, you just have to disconnect the battery, or you can even remove the fuse that is there inside the headlight of the car.

4. Burning of Wires

my headlights won't turn on

Photo Credit: http://www.thesamba.com/vw/forum/viewtopic.php?t=582776&view=previous

Also, there is a possibility that the wires that connect the headlights of the car to the main battery of the car start burning. This means that if the connecting wires either start burning or there is a loose connection in between the circuit then there are full chances that the headlights of the car won’t turn on.

In this case, the first step that you have to perform is to check out the connecting wires. If there is a loose connection or burning of wires, then you have to disconnect those wires and replace them with brand new wires. If the replacement of the wires is not done on time, then there are chances of a short circuit between the wires, which might lead to excess smoke in the bonnet of the car. It might also result in excessive heat inside the car that will be harmful to the people sitting inside the car and the engine of the car.

Lastly, if the headlights of the car won’t still get turn on even after checking out for every possibility and diagnosing every failure then you just have the last option. As the last option, you have to take your car to the nearest mechanic and leave your car there for proper repair.

There are many possibilities that lead to the headlights of the car not turning on. It is important to learn about what leads to the headlights not turning on and what is the exact solution of the problem.

Even after multiple attempts and inspecting every failure with proper care, the headlights of the car do not turn on then you have to visit the nearest mechanic. It is also a good idea if you wish to invest in socket organizers. In the blog above there is a mention about every small detail that every driver has to know before he starts driving.

How To Make Your Truck Sound Louder Than Normal?

Written by Chris in Auto Engines,Types Of Cars

How To Make Your Truck Sound Louder

Many people like to make modifications to their vehicle’s existing exhaust system. This is done to make their vehicle sound louder than normal. You will find some products available that can increase the volume of your vehicle’s existing exhaust system.

An amplified noise will make your vehicle’s engine sound more powerful, making others notice your vehicle when driving on-road. There are mufflers available designed to amplify your vehicle’s sound. If you own a truck and look at how to make your truck louder, you may replace the rubber mounts on the exhaust pipe by using welded metal hangers.

The modification has to be done correctly to make the vehicle’s exhaust system sound loud.

How Exhausting System related to Sound?

Your main aim would be to modify the engineering system of your vehicle. If you are looking for more noise, you must cut any small portion of the exhaust pipe. Your vehicle will start sounding much louder. You may be required to pay fines or nuisance charges because every city has noise-related regulations.

The muffler usually works by channeling through the sound that comes from the engine by redirecting the sound waves. Also, fiberglass can be incorporated into the design to reduce high-frequency sound.

What Exhaust System will do for your Truck?

how my truck sounds louder

Photo Credit: http://wolo-usa.com/air.htm

Most truck manufacturers will leave plenty of room for improvement. Many companies choose the least expensive exhaust systems. A branded exhaust can free some power in your engine. They allow an efficient path for the exhaust gas to escape. Your engine will start breathing better, and when more fuel and air are burnt out, this will create more power. When purchasing the exhaust system, consider the material used to make the system.

Choose a system made of aluminized steel or stainless steel. Stainless steel is designed for trucks and will have a longer life. When buying an exhaust system, think about how you are going to use your vehicle. Most branded high-quality systems will improve the appearance of your truck.

Your truck will have larger tips and polished muffler providing your vehicle a refined, aggressive look. If you are using performance parts, another thing to keep in mind is the diameter of the pipe. Slightly large pipes will benefit trucks, but if you choose too big, it will affect your vehicle’s performance.

Exhaust that Can Make Your Engine Roar

Exhaust-that-can-Make-Your-Engine-Roar

Hearing the engine of the truck rumbling and the rubber burning on the road will make you think how powerful the truck is. Only by using the right truck parts, your truck will reach its full potential. The most important thing you must do is to get a better exhaust system to increase the efficiency and power of your vehicle.

The trucks are usually designed to increase horsepower by producing better torque and gas mileage. When it comes to how to make your truck louder, the best thing is to streamline the exhaust system and replace the muffler. Choose a muffler brand that is specifically designed to amplify the sound of your truck. Such modification will not affect your truck’s emissions.

Make sure you use an upgraded exhaust system, which will have more breathing room. When your engine has enough fuel needed to operate efficiently, this could help you save gas. The great sound the truck produces is only due to getting a better exhaust system. Whenever you hear the thundering sound out of the truck’s engine, you will come to know the vehicle has done with some modification. Here are the details on which type of exhaust you must buy to increase your truck’s sound.

  • Single-side exhaust – The truck part is similar to that of the stock exhaust, but it will have more space to increase the performance of the engine. By installing this exhaust, the sound of your vehicle may not be that much affected.
  • Dual rear exhaust – Many people believe these exhausts are best fitted under the bumper instead of using them around the wheels. The performance of your vehicle will remain the same as that of dual-side exhaust.
  • Dual side exhaust – If you want a roaring sound, you may use dual side exhaust.

When you are planning to upgrade your exhaust, don’t forget to upgrade the muffler too. When you replace both the truck parts, this will increase power as well, and you will finally achieve your goal of making a bigger noise.

For sound depth, it is recommended to use noise enhancing mufflers. Many truck owners purchase new exhaust tips to boost the sound of their vehicle. However, by using the new exhaust tip, there will be no effect on sound; rather, it will improve the appearance of the vehicle.

How to Make Your Truck’s Engine Roar?

truck sounds louder

Photo Credit: http://www.dx.com/p/ultra-loud-bicycle-air-horn-truck-siren-sound-120db-23681#.WMaigDuGPIU

If you are looking to make your truck sound louder than normal, then you should be ready to spend lots of money. It may cost you thousands of dollars to install a catalytic converter with dual glass pack exhaust. Let us see how to make your truck louder by using a few branded products and tools.

  • Buy muffler tip – You must buy a muffler tip fixed with a connector of the same diameter of your truck’s muffler tail pipe. You can purchase the muffler tip from a local store. The muffler tip must have a big exit hole diameter to produce a bigger sound. You can yell through the muffler tip to her the sound that is created and how much sound the exhaust will also produce. Place the muffler tip to the muffler tailpipe and screw them tightly so that the tip stays in place. You may also drill ½ inch 10 to 15 holes evenly throughout the base of your muffler to enhance the noise of the exhaust.
  • Use a branded high-quality muffler – Factory-installed mufflers are specifically designed to absorb the sound of your vehicle. You may replace the muffler by using a high-quality performance muffler to gain the required sound of engine power. This would help your truck gain engine power as well as performance.
  • Evaluate the exhaust tubing – The tubing that is connected to the exhaust of your truck is somewhat similar to that of a garden hose. If you find a kink in the hose, it will lose power and pressure. The same principle is applied to the exhaust lines. This can be remedied by using a special type of machine called a mandrel bender. It will smoothen and pull out any kinks through the exhaust tubing. Thus, it will increase the flow of fresh air to the engine. Tubes that are too small restrict the flow, so you must change the pipe to encourage airflow. This would further reduce back pressure in the exhaust system.
  • Use a turbocharger – Many truck manufacturers offer turbochargers. They will not only increase the sound but will also increase the performance of your vehicle.

If you use high-quality products to enhance the sound of your truck, it will not only increase the sound but also gain horsepower and engine efficiency. A truck with a dual exhaust system will have a booming sound when traveling down the road. With so many customization options available, drivers can easily gain the roaring sound and can increase the performance of their vehicles.