Home

Recent Posts

How To Address The 2006 Ford Fusion Turn Signal Problems?

Written by Chris in Auto Parts,Cars

2006-ford-fusion-turn-signal-problems

The Ford Motor Company received good news when the ‘Insurance Institute for Highway Safety’ named the 2013 Ford Fusion as the ‘Top Safety Pick’. It is a significant achievement for Ford, as only cars that receive ‘Good’ ratings in the frontal impact, side impact, head restraint, and roof strength crash testing are qualified to achieve this.

While it is good news for the 2013 model, the previous Ford fusion models, such as 2006, have been showing major problems, among which the turn signal problem is the main issue. If not attended on time, it can pose a threat to your life while you are driving. Also, it is legally mandatory to hold properly functioning turn Signal lights. This guide will give a detailed view of the various 2006 Ford Fusion turn signal problems and the solutions for them.

Some Common Turn Signal Problems in Ford Fusion 2006

2006 Ford Fusion turn signal problems

Photo Credit: https://www.youtube.com/

The common turn signal problems reported by Ford Fusion 2006 owners are as follows:

  • The turn signal lamps do not blink on turning the multifunction switch.
  • The turn signals are always ON.
  • ​Only one turn signal is always ON, and the other is always OFF.
  • ​Fast or slow flashing.
  • All turn signals flashing at the same time.

The turn signal problems can also give rise to other problems in your car. Hence, remember the following points.

  • Your brake light’s wiring goes through the turn signal switch. A problem in the turn signal can eventually lead to a future problem in the brake lights as well.
  • Ford Fusion 2006 also encompasses a multifunction switch which is a common control for turn signals, running lights and headlight.

Some Basics about Turn Signal Operation

The turn signal system holds an extremely simple method of operation. It is a stand-alone unit which is designed to perfection, as it is one of the inevitable requirements while driving a car. Hence, they are designed to work without fail and hold only a few least-complicated parts. So, 2006 Ford Fusion turn signal problems are pretty simple to diagnose and correct.

The power for the turn signal lights come from the ‘Junction Box’ through the fuse to the flasher unit, which is plugged into it. The flasher unit contains the ‘bi-metallic spring’ which heats up and cools down alternatively due to the two-sided metal operation. This effect causes the flasher light to go on and off as an action of blinking.

Materials You Will Need

standard-hand-tools

Before getting your hands on, cross-check with the checklist below, to ensure that you have the following materials with you:

  • Digital Multimeter (Volt-Ohm meter)
  • Car owner’s manual for your Ford Fusion 2006 model
  • Standard hand tools

How to Solve the Ford Fusion 2006 Turn Signal Problems?

1. The Turn Signals Do Not Turn ON

vehicle-fuse

The usual cause of turn signals not turning ON is a defective flasher unit or a blown fuse. Perform the following steps to correct the problem.

  • Check the vehicle fuse if it is blown. The fuse box may vary from one to several in number according to the vehicle model. Search the location of the fuse box in your Ford Fusion 2006 owner’s manual.
  • If the fuse is blown, then you have to replace a new one to resolve the issue. When you purchase a new fuse, ensure that the amperage value is the same as that of the blown fuse.
  • If the fuse is not blown, check for the flasher unit. This is present in the fuse box. To change the flasher module, consult a vehicle mechanic. If you wish to DIY, get the owner’s manual of your Ford Fusion 2006 and check the parts individually on the manual to figure out which of them have been blown out. If a particular transistor or diode is disconnected from the circuitry, you have to replace the same part exactly and solder it back. You can find the exact specifications of each device from the owner’s manual.

2. Turn the Signal Always ON

This situation occurs rarely. But if you encounter one, then the only solution is to contact the dealer. The dealers use some of the best OBD2 Bluetooth scanner tools to reprogram your Smart Junction Box (SJB). Under worst cases, the SJB will have to be replaced. Unfortunately, Ford has not recalled anything regarding this issue.

3. One Turn Signal is Always ON, and another is Always OFF

turn-signal-always-on

When either the driver-side or passenger-side turn signal works, it means that the bulb has become defective. This is because when the bulb is blown out, there is no current flow in the area where the bulb is not working. This reduced current flow prevents the flasher unit from attaining a particular temperature that will turn off the turn signal.

Replacing the blown-out bulb will resolve this problem. While replacing the bulb, check the owner’s manual for the specifications or take the blown-out bulb to the automobile spare parts store to get a new one.

4. Fast or Slow Flashing

When your turn signal flashes too fast or too slow, the main reason is the usage of the inappropriate bulb. While changing a blown-out bulb, it is most common for anyone to replace a bulb that does meet the required specifications.

When the newly replaced bulbs are high-power bulbs, then they draw more current, which eventually heats up the flasher strip of the flasher unit and makes it wear out. This will cause all the four turn signals to flash too fast or too slow.

Replacing the correct bulb and changing the flasher unit is essential to resolve this problem. While replacing the bulb, ensure that you refer to the owner’s manual, which will indicate the right bulb that has to be inserted. The bulb sockets are coated with grease to repel water. The manufacturer performs this action. Hence, while replacing the bulb, do not remove the grease from the bulb socket.

5. All Turn Signals Flashing at Once

Under this condition, inspect the turn signal switch, if there is a short between the brake lamp circuit and a signal circuit. Open up the column plug and harness for shorts. Check the current value of the harness using a digital multimeter. If a short is indicated, then get the switch or harness replaced accordingly.

Tips to Avoid 2006 Ford Fusion Turn Signal Problems

2006 Ford Fusion turn signal problems

Photo Credit: http://car-mods.wonderhowto.com/how-to/install-aftermarket-turn-signals-honda-motorcycle-244142/

By following the below tips, you can avoid the failure of turn signal problems:

  • Get your vehicle serviced regularly. This helps in identifying minor problems on time and prevents them from creating havoc on your drive.
  • Clean and maintain the vehicle regularly, even while not in use. Use best car buffer to bring back the shine to your old car. Check for all the parts to see if they are working, including the turn signals.
  • Do not perform quick switching or ping-ponging between lanes to confuse or irritate other drivers. By avoiding such activities and using the turn signals at the right place, you can save a lot on repair costs and, ultimately, your life.

Conclusion

The usage of turn signals is a must and legally obligatory to follow. A 2014 national study conducted by the Society of Automotive Engineers says that nearly 50% of the time, drivers fail to make a lane change. Even while making a lane change, 25% of the time, drivers forget to turn signals. It is not rocket science to understand that while making a lane change, you have to turn on the blinkers. A small act of negligence can cost a life.

We hope that this guide has addressed the common 2006 Ford Fusion turn signal problems. Leave your valuable comments in the below section and pass on the techniques that you followed and worked successfully for you. Cars also face certain types of transmission problems; please have a look at them too.

Are Saturns Good Cars To Buy? Details On Customer Reviews

Written by Chris in Auto Engines,Cars

Saturns-Good-cars

General Motors established the Saturn Corporation as a subsidiary and registered a trademark in 1985. In 2008, GM announced that it would concentrate on its four core brands Chevrolet, Cadillac, Buick and GMC, and sell Saturn to Penske Automotive Group. With the withdrawal of Penske Group from the acquisition process, GM decided to sell off all the remaining Saturn. It stopped the manufacture in 2008 and officially shut down the brand by January 2010.

If you are planning to buy a used vehicle, are Saturns good cars? Let us analyze the customer reports in detail.

Customer Reviews in Favour of Buying Saturn

Several customers have reported that their Saturn cars have been working fine, and they have supported in favor of buying them. Some reports for your consideration.

‘I own a repair shop, and any model of Saturn which I look at is in good condition. It is a great choice. I have serviced a few of them and never heard of any serious complaints or came across major repair issues. Many of my customers are turning to Saturns as an alternative vehicle because of its fuel efficiency and good warranty backup. But if you wish to buy one, then drive and see for yourself before deciding. Good luck!’ says a 36-year-old certified mechanic.

‘My 1999 Saturn SL2 has been more than reliable. I am yet to get stuck anywhere with it. Saturns, like every other car, are not without fault, but they are easy to fix when anything goes wrong. Go Saturn; you will be happy with your decision,’ says an advanced member of Saturn fans forum.

‘I bought a secondhand 1999 SL2 Saturn 3.5 years ago, and the only problem I have had until recently was changing the battery and the tires. It’s been a great car. I normally get 30-33 MPG on my bi-weekly road trips. I think that they are wonderful little cars, and I’ll have Saturn at the top of my wish list, says a customer from Automotive Forums.

Reviews Opposing Saturn’s Purchase

Saturn Cars

Photo Credit: http://www.ranker.com/list/full-list-of-saturn-models/reference

Are Saturns good cars? Certain people say a big ‘No.’ Let us see why.

‘In 1994, Saturn served as the 3rd best-selling model in the United States. Even in 2000, it was the 2nd most-selling model after Lexus. But Saturn was a good company when it was an active brand, producing quality products. The major problem with buying a Saturn is its lack of customer support for operating issues, as the company is no more. According to the 2009 customer reports, it is possible for mechanics to fix any issues that come up with Saturns in the years to come. But the warning is, any repair is going to be much more costly in the years to come,’ says David Hana for Forbes.

‘Though GM dealers would be able to honor warranties and services, there are practical limitations to parts inventory and technician training. Normal servicing shouldn’t be a problem, but major repairs could pull in more time and money, particularly for low-volume Saturns like the Sky and Astra’ says Edward Niedermayer of ‘The Truth about cars’ blog.

‘I bought a 1997 Saturn SC1 from a car dealer and had a lot of problems with it. The check engine light was illuminating, and the only thing I could understand from the code was that cylinder four was misfiring. It still gives me problems after replacing the fuel injector, spark plugs, wires, and coils. I am trying to sell my car. But it is a great car for mileage factors,’ says another reviewer from Automotive Forums.

Risks of Buying a Retired Product

General Motors has announced that it would honor warranty claims of Saturn, repair and maintenance needs at any GM franchisees. However, buying from a retiring or retired brand carries certain inherent risks, which the consumers need to know before making a purchase.

  • The normal rules of depreciation will not apply to discontinued brands.
  • The future availability and cost of spare parts are at stake. Even though many dealers continue to carry these parts for several years, at some point, it becomes difficult and expensive to get the spare parts.
  • ​Although GM honors the warranty claims of its discontinued models, there is an ongoing risk that GM could declare bankruptcy, leaving behind all its warranty in jeopardy.
  • Once the warranty has expired, you should be able to find a qualified independent mechanic who knows the nuances and has the knowledge and expertise to handle your car.

What Models to Consider or Not to Consider from Saturn?

Saturn Cars

Photo Credit: http://www.ranker.com/list/full-list-of-saturn-models/reference

There are totally nine different models of Saturn; they are:

  • Astra (2008-2010)
  • Aura (2007-2010)
  • ​Outlook (2007-2010)
  • ​Sky (2007-2010)
  • ​Relay (2005-2007)
  • ​ION (2003-2007)
  • ​VUE (2002-2009)
  • ​L – series (2000 to 2005)
  • S – series (SC, SL, SW 1991-2002)

Here comes a short list of models to stay away from:

  • All L series and VUE with a V6 Engine – Both these types use a 3.oL V6 engine which is expensive and quite difficult to work on. The repaired or new engine has to be ready sooner before the car is completely worn out. They cannot be claimed as totally unreliable, but for the age of the car, it is not a good investment,
  • ION or VUE with CVT transmission – Not advisable, as the transmission is not reliable even after expensive repairs.
  • Astra – This model was disappointing to a lot of customers as it didn’t give an impressive fuel economy.

The rest of the models have appeared to be a better choice for customers.

The Bottom Line

As always, consumers should make a buying process with eyes wide open. As far as Saturn is concerned, there are obviously better models and choices, which are more reliable, have lower cost quoted by owner and do not carry improper risk. It is certainly a customer’s choice after all. If you find that Saturn does not get out of your head, then definitely go ahead and give it a shot.

We hope that this guide would have given you an insight into your most striking question ‘Are Saturns good cars to buy?’ Keep posted for latest automobile updates and intriguing articles on automotive and accessories such as Best OBD2 Bluetooth, Best Octane Booster, Best Synthetic Oil, Best Coolant, best 10-inch subwoofer and Best Car Buffer.

Customer Reviews On 2004 Hyundai Sonata Problems

Written by Chris in Auto Engines,Auto Parts,Cars

2004-Hyundai-Sonata-Problems

The Hyundai Sonata 2004 is certainly a roomy and comfortable mid-sized sedan whose quality and elegance will surprise you, when you get in and take a look at the very first time. Even though its cost was less than the other popular brands at that time, it is packed with many features and offers a cozy seating experience.

Although considered reliable, 2004 Hyundai Sonata Problems come up from time to time. Consumers raise several issues about their Sonatas, which are collaboratively delivered here for your reference. If you are facing similar issues with your Sonata, take the action items accordingly.

Common 2004 Hyundai Sonata Problems

1. Parking Lights Don’t Turn Off

Parking lights fail to turn off at times, all the time, or intermittently.

  • Consequence: The battery gets drained eventually.
  • Fix: The main problem is in the cabin fuse box. It is necessary to replace the fuse box completely to solve the problem.

2. Noise on Startup

Hyndai Sonata 2004 problems

Photo Credit: https://www.youtube.com/watch?v=Es8n_r12iu8

Too much noise from the engine on start-up, even after several hours of the shut-down of the engine.

  • Consequence: Unpleasant driving experience.
  • Fix: If the noise lasts for over 5 or 6 seconds after starting the engine, switch off the engine and check for the level of engine oil. If the oil level seems to be right, then the problem might be due to timing chain tensioner. Hyundai has developed a better version of the tensioner recently. You can contact your dealer to get it replaced.

3. Faulty Turn ON of Check Engine Light

Faulty-Turn-ON-of-Check-Engine-Light

The Check Engine Light, also known as the Malfunction Indicator Lamp, is a signal which indicates that there is a major problem with your car’s engine. Any driver would panic to see the Check Engine Lights turn ON, as it is certain to cause a big hole in your pocket. But the CEL light turn problem in the 2004 Hyundai Sonata was due to a faulty accelerator pedal switch.

  • Consequence: An unnecessary panic from your end.
  • Fix: Problems related to the accelerator pedal position switch can cause the Check Engine Light (CEL) to illuminate. An improved switch has been developed by Hyundai to address this problem. Contact your dealer to get it replaced.

4. Premature Failure of the Timing Belt

Premature failure of the timing belt has been reported by many customers who own a 2004 Hyundai Sonata.

  • Consequence: When the timing belt fails while driving, it can cause a devastating effect on the engine.
  • Fix: Ensure that the timing belt is regularly inspected during each manufacturer’s recommended schedule of maintenance. Get the timing belt replaced if necessary.

5. Rough Idling

Rough-Idling

Rough engine idling is a symptom of a possible engine issue that is yet to occur. The rough idling problem was encountered severely in the 2004 Hyundai Sonata.

  • Consequence: Rough idling can be a symptom of exhaust problems, loss of power in the car, or a hole in the air intake valve.
  • Fix: A defective Exhaust Gas Recirculation (EGR) switching valve on the 2.7L V6 and 2.4L V4 cylinder has been identified to be the reason for rough idling. Hyundai recommends the replacement of the faulty EGR switching valve.

6. Damage of the Crankshaft Sensor

Premature timing belt failure may result in serious engine damage. When you take your vehicle to a service station to get the issue resolved, it is highly recommended to inspect the condition of the crankshaft sensor. A timing belt failure will certainly result in damage to the crankshaft sensor as well.

  • Consequence: The car does not start or start with difficulty. Mileage goes poor, as the car lacks the power to run.
  • Fix: The crankshaft sensor has to be replaced. The service type and cost depend on the vehicle.

7. Rust Formation at Front Suspension Mounting Points

Rust-Formation-at-Front-Suspension-Mounting-Points

Internal corrosion of the subframe results in thinning of the subframe steel.

  • Consequence: The corrosion may progress from the forward mounting points towards the lower control arm, which causes it to detach from the subframe. As a result, the drive power to the wheels is lost, and the front wheel may make contact with the wheel well. This highly increases the risk of a crash.
  • Fix: Hyundai has announced a recall of vehicles having this issue. The dealer will coat the subframe with rust-proof material free of charge.

8. Speed Sensor Failure

Speed sensor failure in the transmission.

  • Consequence: Automatic transmission does not shift properly, and the check engine light illuminates.
  • Fix: Replacement of speed sensors is required. They are inexpensive and easy to replace.

9. Brake Light Won’t Turn Off

Car brake lights stay ON even after the car is turned off

  • Consequence: Battery drains out.
  • Fix: Check the brake light switch on the brake pedal. Replacement of the switch would be necessary. Another possible cause could be an issue with the vehicle’s overall electrical system. In this case, a thorough inspection by a professional and necessary repair would bring a solution to the problem.

10. Car Doesn’t Start on Fuel Fill-up

Car-Doesn’t-Start-on-Fuel-Fill-up

The car doesn’t start even after fill up. If it starts, it does not idle. The problem recurs even after fuel pump replacement.

  • Consequences: It is definitely an issue of a kind.
  • Fix: Get the EVAP system scan tested. The engine is flooded with fuel through the EVAP after fill up. While starting the car, hold the accelerator pedal halfway to the floor. This is a temporary solution to fix this problem until you get it examined by a mechanic.

11. Alternator Failure

Alternator-Failure

Premature failure of the alternator is noticed.

  • Consequence: The vehicle faces difficulty in starting, even after the battery is fully charged.
  • Fix: Hyundai has developed an improved alternator. Check for recall or get it replaced from the dealer. The new alternator would be requiring a different diameter drive belt.

12. Problem with the charging system

The battery drains quickly. But no problem is found with the alternator and CPU.

  • Consequence: Lights and signals do not work.
  • Fix: Check the crank pulley or harmonic balancer and ensure that the rubber is not broken. If the problem still exists, get it checked by a mechanic.

13. Remote Fails to Open the Trunk

Remote works fine everywhere else but fails to open the trunk alone.

  • Consequence: Not a major problem,
  • Fix: Check the main switch of the trunk. It could have been turned off inadvertently.

How do you avoid problems with your 2004 Hyundai Sonata?

Hyndai Sonata 2004 problems

Photo Credit: https://www.cargurus.com/Cars/2007-Hyundai-Sonata-Overview-c7689

If you own a 2004 Hyundai Sonata or are considering buying a used Sonata, there are certain things that you can do to avoid the occurrence of the most common problems.

  • While buying a used 2004 Hyundai Sonata, have a trusted mechanic to perform a thorough inspection on the vehicle. This will make you aware of the existing minor problems, which would help in identifying repair issues with the car later.
  • Perform scheduled maintenance on your car. This will help the parts to last longer and avoid common problems.
  • ​If you live in a heavily snowy region, wash the car regularly to avoid corrosion due to road salts.
  • Sync with the frequent recall announcements to address any of the major safety issues to which you’re Hyundai Sonata 2004 is prone to.

Conclusion

Even though the 2004 Hyundai Sonata problems are majorly non-mechanical, do not take the minor issues casually. Address them on time to have a safe ride in your favorite car. We recommend you take your car for a tune-up at your nearby automobile repair center to know the problems, even if you are not able to figure them out.

We hope that this guide has helped you obtain a solution for your 2004 Hyundai Sonata problems. Do follow our latest posts on Best OBD2 Bluetooth, Best Octane Booster, Best Synthetic Oil, Best Coolant, Best 10-inch Subwoofer and Best Car Buffer. Pass your feedback and experiences below in the comment section. Subscribe to our blog for up-to-date information about automobiles. Cheers!

How To Deal With The Honda Civic Electrical Problems?

Written by Chris in Auto Engines,Cars

Honda-Civic-Electrical-Problems

In the fast-growing world of technology, there are many new technologies coming up every day. Along with that, there are also many auto-electrical systems that are getting more and more convoluted and are, hence, traumatizing the set various limits of the present. Before buying a Honda car, the customers should go through all the electrical problems that are commonly faced by the users.

Are you stuck somewhere in the middle of the road while driving your Honda car? Before planning a trip, have you gone through the Honda Civic problems faced by the users? It is always advisable to know about the precautions that have to be taken while driving a Honda car. This article will help the customers know about their Honda’s electrical system in detail.

Problems that are Commonly Faced by the Users

If you are planning a trip with a Honda car or you are planning to buy a Honda car, then you should go through the Honda Civic electrical problems that are more commonly faced by the users. Some of the many commonly faced problems are as follows:

  • Complete car shut-down
  • Dead alternator
  • ​Unstable condition of the speedometer
  • ​Tail lights not working properly
  • Problems with catalytic converter

Trouble Shooting Tips

As mentioned earlier, the customers should completely know about the Honda Civic electrical problems before buying a Honda car to avoid any mishap. The customers can also maintain the various parts of their car by some simple D-I-Y steps. Many of the troubleshooting tips about the various parts of the Honda car are mentioned below:

1. Honda Battery

Honda Civic Electrical Problems

Photo Credit: https://axleaddict.com/auto-repair/Alternator-Problems-Diagnosing-Electrical-Problems

The battery which is considered to be the heart of the car and a device for storage of about 12 volts, which is simply utilized to ignite the engine and also operate the various electrical accessories that are installed in your Honda car. This 12-volt battery comprises about six cells that are stacked with +ve and -ve lead plates. The insulators separate these plates.

If a chemical reaction takes place between the electrolyte and the lead plates, then it creates quite dangerous and explosive gasses that are too harmful. Hence, customers should take extra care while charging their car batteries and keep the batteries clean in order to ensure adequate ventilation.

If your Honda car displays symptoms of system failure when starting it, then the customers should first perform the visual and the battery’s voltage test. Diagnosing the battery’s exact and perfect condition is the best way by which you can avoid the starter’s or alternator’s installation.

2. Honda Alternator

Honda Civic Electrical Problems

Photo Credit: https://www.youtube.com/watch?v=qYVWmQE5tDk

The alternator is the part of the Honda car that produces electricity and is also used to maintain the storage battery charge so that it aids in running all the car’s electrical accessories. It is usually belt-driven from the engine. It gives out an alternating current (AC). AC is a type of current that may not be stored in the car; however, it is produced quite efficiently. This is the reason for cars not making use of generators these days. They use alternators and, hence, convert the car’s electricity to direct current (DC). Most of the alternators make use of internal voltage regulators in order to maintain the ideal system voltage.

If you install an operational warning light (AWL) for the car’s alternator, it becomes quite easy for you to catch the problems that are faced by the alternator. To check the circuit of the warning light, you should position the ignition switch to “ON” and should see to it that the engine does not start off.

After turning on the warning light, if the alternator doesn’t ON, then you should conduct the following steps:

  • Eject the plug from the alternator
  • Ground the terminating wire

If the light of the alternator comes on then, you can only be satisfied for a while as it indicates that the wiring of the alternator is completely okay, but the alternator of the car is defective and needs repairing.

During high temperatures and heating conditions, if your car turns to idle mode for a long time, then various things happen that add up to the alternator’s low output. These things are as mentioned below:

  • When the alternator’s heat within it rises, then the alternator’s electrical resistance also rises, which in turn results in the reduction of the charging capacity of the alternator.
  • When the temperature rises, it results in a reduction of the regulator’s voltage setpoint, which in turn reduces overcharging chances and the so-called “boiling” of your Honda’s battery.
  • ​The newly designed alternators come with a delay start option, which is developed in the form of a regulator circuit. The circuit start option usually postpones the load that the engine places when ignited from the ideal standby position.
  • This helps the smaller engines manufactured in the current times that tend to unload down sooner during acceleration, especially due to its increasing charging demands.

Maintenance Tips for a Honda Car

Honda Civic Electrical Problems

Photo Credit: http://honda-tech.com/forums/honda-civic-2006-2015-79/2008-civic-air-conditioning-problems-blowing-cold-frigid-cool-warm-air-3256526/

  • One of the most basic maintenance tips for Honda car users, as per the reports, suggests that the users should install the best accessories in their car. These accessories might include OBD2 Bluetooth speaker, octane booster, 10-inch subwoofer, car woofer and much Also, the users should have the synthetic oil for oiling purposes in their car to avoid Honda Civic electrical problems. Lastly, the users should see to it that their cars are served with the coolant to avoid overheating issues.
  • The electrical system of your Honda car requires a completed checkup as well as tests every ONCE every 2 years or whenever there is a service of the car for any driving problems. It has been reported that most of the driving problems of Honda cars are caused by variations in the voltage, and hence, solving the driving problems should be your foremost step while troubleshooting electrical system problems. The computerized controls that are found in the majority of cars today are the reason for various driving problems in cars.
  • ​The electrical system of your Honda car should be tested for loading to certain specified standards. This can be done by simply switching ON all the lights and accessories to drain simple voltage. While measuring loads of the circuit with the help of an ammeter, the drops of the circuit voltage with a Digital Volt OHM Meter (DVOM), which is the one and only way to check the function completely.
  • If the voltmeter testing of your Honda car does not point out the issue, then you should probably get an in-detailed problem checkup done. You may get help from an automobile technician (electrical expert) who has the proper and complete knowledge about the electrical system of your Honda car.

Conclusion

It becomes quite difficult when it comes to dealing with the civic electrical problems of Honda cars. To avoid any mishaps, we have provided some quite useful things about some of the major components of the car. Also, we have provided some very helpful tips for the maintenance of your Honda car. We hope that the above-provided information was useful to you in avoiding the problems faced by the electrical system of the car. Do let us know about your reviews to us in the comment section below. Your suggestions are valuable.

Best Car Buffer: A Comprehensive Guide For Buyers

Written by Chris in Reviews

Best-Car-Buffer-

To keep your car in its best condition, you will most probably be willing to go the extra mile and exert the effort that is necessary. As a priced investment and a well-loved property, many provide tender, loving care for their auto. With this, one of the things that you should have would be the best car buffer. With the latter, you will be able to keep your car clean and shiny, making it command a second look when you are on the road.

With too many options for car buffers, however, which one should you pick? We are here to help you make a well-informed choice. Keep on reading to learn more about how to choose the best and, more importantly, some of the best options that are currently available on the market.

Benefits of Using Car Buffer

Benefits-of-Using-Car-Buffer

If you do not yet own a car buffer, chances are, it is simply because you do not know what it can do. Below are some of its most significant advantages, which might just convince you to purchase one shortly after reading this guide:

  • Saves a Lot of Time: Traditionally, people would use wax and a piece of cloth in order to keep their car shiny and clean. This can be time-consuming, especially if you pay attention to every detail. With a car buffer, on the other hand, it can be done quickly and, most importantly, without requiring too much effort on your end.
  • Saves a Lot of Money: Think of how many times you have to go to a local auto shop just to have your car waxed or buffered. You can do it on your own if you invest in a car buffer. It is pretty much an easy task as long as you have the time and the effort. You no longer have to pay someone to do it for you.
  • Restore your Car’s Shine: This is probably the main reason why people are investing in a buffer with premium quality. It is an excellent tool that can aid in the restoration of the luster and shine of a car, making it look new and clean. It can also help to effectively hide dents, scratches, and other imperfections.

Top Picks for the Best Car Buffer

Below, you’ll see more detailed reviews, but you can also click the links above to see current prices and read customer reviews on Amazon.

1. Porter Cable 7424XP Variable Speed Polisher

AD

Excellent value for money – this is perhaps one of the best things that you can expect from this model. This is an ideal choice for anyone who is looking for an entry-level model that can deliver superior performance without having to spend a lot.

The manufacturer makes sure that it is going to be user-friendly by incorporating features that will make the unit a snap to operate. For instance, it has a strategically placed trigger. It also has random orbital motion, which will minimize the possibility of damage.

The 4.5 amp motor of this unit is another feature that is worth commending. This will make it effortless to tackle any job, and more importantly, will make sure that any task can be accomplished quickly.

Lastly, it also comes with variable speed, providing you with complete control over its use. The speed can be adjusted from 2,500 to 6,800 RPM, allowing you to have it modified based on the intended application.

Things We Liked:

  • Straightforward to use
  • Users can choose the speed that is desired
  • Protection from overheating to avoid burning paint
  • A strong motor that delivers powerful performance

Things We Didn’t Like:

  • It may not be able to penetrate deep into the surface
  • The backing plate is not included

2. Dewalt DWP849X Variable Speed Polisher

AD

Among others, the soft-start feature is one of the many things that give it an advantage over its competitors. With the latter, you will be able to enjoy both power and control in a product that will surely be impressive when it comes to ease of use.

The powerful performance of this car buffer should also be lauded, which can be partly attributed to its 12 amp motor. It also comes with ball-bearing construction, allowing it to perform at its best even in the most demanding applications.

Are you looking for a versatile car buffer? With this model, there is no need to look any further. You will have the freedom to choose the speed that you want based on the task that needs to be done. You can easily adjust its speed from zero to 300/3500 RPM.

The hook and loop backing pad is also worth commending. The main function of the latter is to make it easy to change the accessories without the use of any tool. Because there are several add-ons that are possible, it also excels in terms of versatility.

Things We Liked:

  • Versatile, making it useful for various applications
  • Soft start feature
  • Creates outstanding results to restore the luster of your car
  • Delivers professional-quality results

Things We Didn’t Like:

  • Some users noted that it is a bit heavy

3. Griot’s Garage 10813STDCRD Random Orbital Polisher

AD

If you are searching for the best car buffer, this is one option that should not be missed, especially because it is impressive when it comes to ease of operation. It does not take technical knowledge to make the most out of this power tool.

You do not have to worry about your comfort because of its numerous features that make it an ergonomic car buffer. For instance, it comes with a rubberized grip that minimizes fatigue, even with extended operations. It is also non-slip.

The unit is integrated with an 850-watt motor, which makes it deliver dependable performance. However, its use should be restricted to small-scale tasks. For professional applications, it may not be as powerful as other models.

With the use of this car buffer, you will be able to effortlessly restore your car’s beauty. Aside from removing visible marks, it can also be effective in the removal of oxidation.

Things We Liked:

  • Easy to use, even for beginners
  • Compact design that promotes a high level of comfort
  • Well-made body, allowing it to withstand the test of time
  • Lifetime warranty to provide you with peace of mind

Things We Didn’t Like:

  • Does not perform well in professional applications

4. Flex XC3401VRG Rotary Orbital Polisher

AD

Equipped with a true dual-action motion, you can expect nothing but astounding results with the use of this model, which also happens to be perfect even for novices. There is no need for guesswork. You will be guaranteed to have the anticipated outcomes all the time.

If you are looking for a car buffer that will provide you with complete control, you have another good reason to choose this above others. It is equipped with an accelerator trigger switch and with an adjustable speed. The speed can be modified from 160 to 480 RPM with load and from 3,200 to 6,600 RPM without load.

The seven-fold microprocessor that is integrated into this unit should also be highlighted. The latter is mainly the one responsible for allowing it to deliver consistent speed.

Lastly, it also has shut-off carbon brushes. This means that if the brush wears down, the motor will automatically stop, which will prevent causing damage to the surface of your car.

Things We Liked:

  • Powerful motor that delivers reliable performance
  • Designed with the comfort of users in mind
  • Long-lasting construction
  • Delivers consistent speed

Things We Didn’t Like:

  • It can be a bit heavy for some users

5. Makita 9227C Electronic Polisher/Sander

AD

One of the best features of this model is the variable speed control. Depending on the application, you will be free to choose the speed of the unit. You can have it set from a minimum of 600 RPM to a maximum of 3,000 RPM.

Are you looking for a product that is multifunctional? This is one option that you might want to consider. This is useful not only for polishing but also for sanding. More than just for automotive work, it can be used even for stone polishing.

Your comfort has been emphasized by the manufacturer, providing you with the assurance that fatigue is going to be minimized. It has an ergonomic handle and a comfortable grip.

Lastly, this is an ideal choice for the best car buffer because of its soft-start feature. This means that it can start smoothly, and it will not create a lot of vibrations. This is one of the reasons why this is going to be a user-friendly option.

Things We Liked:

  • Lightweight construction
  • Made by a trusted brand on the market for power tools
  • Adjustable speed for various applications
  • Different backing plates are available, making it flexible

Things We Didn’t Like:

  • The handle can be easily prone to scratches
  • Does not come with a foam pad on the handle

Types of Car Buffer

AD

Before making a decision with regards to which one to pick, you should be first familiar with the different types that are available on the market:

  • Rotary Car Buffer: This is the common choice for professionals since it is the most powerful option that you can have. They have a direct drive system and utilize powerful rotating motion in order to deliver performance that is hard to rival.
  • Orbital Car Buffer: This may have lesser power, but it is made to be user-friendly, which makes it the ideal choice for home users. They also cause less friction, which is why they are safer to use, even for novices.
  • Dual Action Car Buffer: It is equipped with motor and drive units that will rotate in circular motion randomly. This is suitable for waxing and light polishing jobs. There will be no swirls and holograms left once it is done with its job.

Essential Factors To Consider

Make sure to keep these things in mind before making a decision:

  • Ease of Use: Just like in the case of any job, buffering your car should require minimal effort on your end. With this, choose a product that comes with a lightweight design and user-friendly features. It should be free from complicated features, especially if you have not used a similar tool in the past. The manufacturer must also provide comprehensive instructions on how it is used.
  • Feedback: If you are wondering about which one is the best, you can gather opinions from other people. To do this in a convenient manner, resort to reading online reviews. You can also ask for suggestions from people you personally know, such as your family and friends. With their insights and experiences, it will be a lot easier for you to compare the possibilities that you will be confronted with.
  • Price: While it may be tempting to choose a product because it is the cheapest option you find, this may not be a wise decision. At all times, it is important to look beyond price. In some cases, the cheap ones are inferior in terms of quality and functionality. You should consider your car buffer as an investment. This means that you should not hesitate to spend more if this is tantamount into being able to enjoy a product that is unmatched in terms of the performance that it can deliver.
  • Maintenance: Just like in the case of any other tool that you have, maintenance will be necessary in order to keep your car buffer in its best condition, even with prolonged use. With this, choose a product that requires minimal maintenance. Make sure as well that the manufacturer will provide comprehensive instructions on how it will be possible to maintain the product at its best.
  • Comfort: It is also important to consider your comfort in choosing the best car buffer. For the product to be comfortable, it should be compact and lightweight, which means that you will not have any problem even if it is used for an extended period. It should be easy to handle and control. There should also be features for minimizing the vibrations that are produced in order to lessen fatigue.

Conclusion

Do you want your car to look shiny and clean all the time? Do you want an easier alternative to traditional waxing? Do you want to save money? In all of these instances, without a doubt, you will need to have the best car buffer. Do not be overwhelmed with too many options that are available. Take your time before you reach a decision. Do your research and consult with what other people have to say. Or better yet, keep an eye on the five models that we have mentioned earlier.

​

Your Quick Guide In Choosing The Best 12-Inch Subwoofer

Written by Chris in Reviews

For beginners, a subwoofer should never be mistaken as one and the same as the traditional speaker. Yes, it is a type of speaker, but its function is different. It is meant specifically for the reproduction of low frequencies. Whether you like listening to intimate or heavy metal songs, an excellent subwoofer will do a lot in order to recreate exemplary audio. With this, there is no wonder why audiophiles or people with discerning preferences invest in the best 12-inch subwoofer.

In your search for the best subwoofer that can be fitted in your car, you will definitely be overwhelmed with too many options that will confront you. This, however, does not mean that you can just pick any product. At the end of the day, it is important to assume the part of a responsible buyer, which you can do by taking time to differentiate the possibilities that you will be confronted with.

Benefits of Having a Car Subwoofer

AD

Here are some of the reasons why a subwoofer is a must in your car, which might just convince you to purchase one now and have it installed as soon as possible:

  • Improve Audio Experience: This is the reason why most people incorporate a subwoofer in their car audio. A traditional car stereo comes with small components, and hence, they can deliver dismal audio quality. With this, the addition of a subwoofer can do a lot to create a better bass and other frequency tones.
  • Prevent Distortion: If the bass range is reproduced by normal speakers in your car, they have the tendency to appear distorted. This is basically because the sound is too powerful, and your speakers are underperforming. This can be resolved through the use of a car subwoofer.
  • Prolongs the Life of Speakers: A higher volume of bass can be good for sound quality, but it can negatively affect the speakers. It can speed up its wear and tear since they are not made to handle powerful sounds.

Top Picks for the Best 12-inch Subwoofer

Below, you’ll find more detailed reviews, but you can also click the links above to see current prices and read customer reviews on Amazon.

1. Rockford Fosgate P3D4-12 Subwoofer

AD

Made by one of the most trusted names within the product category, this is definitely an option that stands out from many others within the competitive landscape. One thing to love about this model is the aluminum voice coil former. The latter is the one responsible for preventing the build-up of heat.

Another feature that makes it exceptional is the Vertical Attach Surround Technique or VAST Technology. This effectively maximizes the radiating area of the cone and at the same time, will provide you with the assurance that its installation will be a snap.

The Flex Bit Basket also adds up to its innovative features. This will provide users with flexibility as even when it is mounted, there are still slight adjustments that can be done in a snap to reposition the subwoofer as desired.

Lastly, it is also worth noting that it has impressive continuous power handling of 400 watts and peak of 800 watts. Such specification simply means that it is going to deliver exceptional power.

Pros

  • Impressive power handling of 400 watts
  • Excellent basket design
  • Impressive heat dissipation

Cons

  • The sensitivity rating is a bit low at 86 dB
  • Deep frequency response is minimal at only 27 Hz

2. Pioneer Ts-w3003d4 Champion Series Pro Subwoofer

AD

When you talk about car audio, Pioneer is a brand that rings a bell. It has gained reputation for the exceptional quality of their products and this 10-inch subwoofer is not an exemption. It has been lauded by many not only because of its power, but also because of its aesthetics, allowing it to add a hint of style in your car’s interiors.

The technical specifications of this model are pretty much impressive, which is exactly what you can expect from ths popular brand. It has a frequency response of 20 to 80 Hz, power handling of 100 to 600 watts, peak power of 1,200 watts, and sensitivity of 96 dB.

Users will also be able to enjoy the flexibility that it offers when it comes to its installation. Even in small enclosures, the subwoofer will be perfectly fitted. Users will also have the freedom to have it configured as desired.

Lastly, the dual spider design of this subwoofer has also captivated the attention of many, which basically optimizes its linearity. The thicker wire is also exceptional as it improves bass accuracy.

Pros

  • Can be easily installed even for beginners
  • Delivers powerful audio performance
  • Glossy finish that makes it aesthetically pleasing

Cons

  • Warranty is voided if purchased from third-party sellers

3. Kicker CompVR Series Car Subwoofer

AD

The construction of this subwoofer is one thing that gives it an edge above many others within the competitive landscape. It comes with an injection-molded cone, which will make it last through the years, making it an excellent investment.

It is also pretty impressive when you take a look at its technical specifications, which are almost similar to what you can find from the models in the higher end of the market. It packs a lot of power at 800 watts of peak power handling. It has a frequency response that ranges from 25 to 500 Hz.

The quality of the audio that is produced by the subwoofer has also been given words of praise by many people. Its performance would make you think it is a model that is a premium brand.

Pros

  • Simple and aggressive design
  • Solid construction that makes it withstand the test of time
  • A perfect model as an entry-level subwoofer

Cons

  • Installation can be a bit tricky

4. Rockville W12K9D2 Subwoofer

AD

Another speaker that really shows positive attributes is the Rockville K9 Series. You can get a lot without spending more. This is an option that should be on your list. It has everything that you want from a high-end speaker that is made specifically for audiophiles.

Flexibility in terms of installation and application will make it a choice that is worth being taken into consideration. More so, it also has reduced mounting depth compared to its predecessor, but it does not compromise the quality of the output.

The subwoofer comes with a big double-stacked 190oz magnet structure. This simply means the bass will be cleaner and louder while providing you with more control.

If you want speakers that work powerfully, these are for you. They have peak handling of 4000W and RMS handling of 1000W. These have ultra-stiff cones that can handle a lot of power, more that others on the market.

Pros

  • Produces clean and crisp sound for an immersive audio experience
  • Trusted even by discerning buyers
  • Perfect for those who prefer insanely loud sound

Cons

  • May have voice coil issues
  • May have quality sound issues

5. Skar Audio EVL-12 D2 12″ 2500 Watt Max Power Dual 2 Ohm

AD

This is another good option that you might want to take into consideration if you are searching for the best car subwoofer. Among other things, the competition grade internals is one thing that gives it an advantage.

The Dynamic Motor Analysis System that is integrated in this product has also been lauded by many. This is another exclusive technology and has the main purpose of making sure that the bass reproduced will be accurate and clean.

It has an exceptional construction, which is reflective of its durability. This is made possible by the use of a high-end polypropylene cone and rubber surround. It also has an elevated design, which does not only look good, but also helps to keep it cool.

Lastly, it won’t disappoint when it comes to its technical specifications. It has a power handling of 500 watts and impedance of single 4 ohms.

Pros

  • Delivers accurate, powerful bass
  • Comes with high-temperature voice coils
  • Built to last

Types of Car Subwoofers

Types-of-Car-Subwoofer

Before you start your search for the best 12-inch car subwoofer, one of the first things that you should do is to decide what type it is that you need. Generally speaking, the following are the options that you will be confronted with.

  • Enclosed Subs: This is the perfect choice if you know nothing about subs. They are already pre-mounted, making the installation a breeze to accomplish. This will also be ideal if you have minimal space inside your car.
  •  Powered Subs: This is a compact product that already combines the amp and the speaker in a single enclosure. It is also perfect for compact cars, but it does not tend to produce bass well.
  • Component Subs: In this case, you get to have the speaker only. The amplifier and the enclosure will be purchased separately, providing you with the freedom to choose. This is the best choice if you want your car audio to be highly customized.

Essential Factors To Consider

AD

If you are on the lookout for the best 12-inch subwoofer, here are some of the most important factors that should be taken into account, which will increase the likelihood of making the right choice.

  •  Budget: The first thing that you have to do is to set a budget in mind. This will help you to narrow down the possibilities. Stick with how much you can realistically spend. Take note, however, that if you choose to buy a cheap subwoofer, the quality can also be compromised. Some of the best models can be expensive, especially those that are filled with advanced features and specifications.
  • Power: This is one of the most important technical specifications that should affect the choice that you will be making. If it can handle more power, it is tantamount into being able to produce more bass. This, however, would also mean that the subwoofer is going to be more expensive.
  • ​Sensitivity: This is another technical specification that will be worth considering. Generally speaking, this is going to be a measurement of the efficiency of the subwoofer. To be more technical, this refers to the capacity of the speaker to convert power into volume. The higher the number is, the better. This means that lesser power is required in the absence of compromising performance.
  • ​Voice Coils: For most car owners and audio enthusiasts, the more popular option are the subwoofers with dual voice coils. They prefer the latter because they are more flexible and can be integrated with different wiring systems.
  • Installation: With the time and effort to spare, you can install the car subwoofer on your own. See to it that the manufacturer provides comprehensive instructions on how this can be done. Make sure that all of the required components are present. Otherwise, you can always rely on the expertise of a mechanic in your neighborhood. This is actually better to provide you with the assurance that your subwoofer will function as expected.
  • Reviews: Still clueless about which one to choose? The best thing that you can do is to read the reviews that have been shared by other users. Their insights and experiences will make it easier for you to weigh the pros and cons of the different models that you will be confronted with, making it a snap for you to decide which to choose for the best 12-inch subwoofer.

Conclusion

By now, we hope that it is easier for you to decide what to choose for the best 12-inch car subwoofer. Go back to the models that we have recommended above or consider the factors that we have mentioned. At all times, do not decide on the basis of price alone. Even with a size of 10 inches, subwoofers can deliver exceptional power, but only if you make the right choice. Be responsible enough to differentiate the choices and in the end, you will be able to make a choice that you won’t regret.