Home

Recent Posts

10 Road Tips Car Problems That You Must Avoid

Written by Chris in Cars

10 Road Tips Car Problems That You Must Avoid

Once your car is on the road, it is exposed to the vagaries of uncertainty and unpredictability. Problems in your car may arise anywhere and at any point in time. It will, therefore, be most prudent for a car owner to be fully aware of the likely problem points and the related remedial measures.

You are then able to avoid any undesirable and problematic situation. Prevention is always better than cure. Below are the 10 Road tips for avoiding car problems.

1. Engine-Related Problems

Engine-Related Problems

Via: http://www.truckinginfo.com/channel/aftermarket/article/story/2012/11/engine-problems-spell-aftermarket-opportunity.aspx

You will be delayed starting the car if the engine of your vehicle has power supply surges, which may also cause your car to stop at any point in time on your journey. Such problems may arise due to a clog in the engine system caused by heat dirt or another heated issue.

The starting problem may also be caused by the discharged battery. The car diagnostic tools (OBD2) fitted to the dashboard ensure that your car is functioning well. The check engine light characterizes any fault detected in the engine, and thus, a smooth road trip is ensured for you.

Tune up the engine before going out to deliver the best balance of power and the lowest emission. The following are the car problems to avoid.

2. Check Your Tires

Check Your Tires

Photo Credit: http://www.aaa.com/PPInternational/International.html?route=%2Fcare%2Fhow-to-avoid-5-summertime-car-problems%2F%3F&referer=www.aaa.com

Check the tire’s pressure using a pressure gauge and measure the pressure of each tire. If you find the pressure below the prescribed limit, fill in the air to make it perfect. Badly worn tires may cause a problem while on the road. Therefore, check the wear bars, which are darker rubber strips, showing that the tire is badly worn out.

You can also check the present condition of the tire by checking the tread of the tire by putting a penny in the tread and then rolling it around. If you observe Lincoln’s eyebrow, change the tire with a new one. Have a similar check for the spare tire. If the tires are underinflated, they may explode.

3. Check the Electrical System

Check the Electrical System

Via: https://www.valpak.com/coupons/printable/great-valley-automotive/10810

Before setting out on a car trip, thoroughly check every component connected to the electrical system, such as exterior and interior lights, windshield wipers, and horns. Even if these are working all right while starting, there are chances that they may go out of order while on the road.

Put some extra bulbs and fuses in your toolbox as a preventive measure. While checking the brake lights, get someone to stand outside the car and confirm their proper functioning. Change the blades of the wiper if they have been in use for quite some time. Check the air conditioner and make it work at the peak of its performance.

4. Look under the Hood

The majority of the essential components of your car are kept below the Hood. Please open it and look at the fluid and oil conditions of different components such as brakes, transmission, power steering, and windshield washers. Replace the used fluid or oil if you find the color and viscosity of the oil below, as prescribed.

Check for any cracks, bulging, or splits into hoses and belts connected to different parts. Check the mark on the battery for the date and year of its installation. If three years elapsed, it is time to change the battery.

5. Test the Safety Features of Your Car

Test the Safety Features of Your Car

Photo Credit: http://www.carztune.com/preventative-maintenance-5-common-car-problems-and-how-to-avoid-them/

It is most pertinent that when your car is on the road, all the safety features of the vehicle are functioning perfectly. Check the seat belts to ensure they are unreeling and retracting properly after buckling them. The seat belt retractor may catch debris, lose functionality, and snap on impact.

Clean the debris out of the belt. Change it with a new one if you find it excessively fraying and wearing. The brake is the first point of security. Test the impact of your brake by a straightforward but effective process.

Go to a low-traffic area and accelerate your car to 50 mph, after which, slam on the brake. If your car moves for more than 100 feet to stop, or if you hear a grinding sound, take your car to the mechanic.

6. Basic Garage Tool Kit

AD

Before setting out on your car, see that your toolbox is well-equipped to face any eventuality related to car problems, while on the road. The toolkit may include:

  • A car jack with support stands
  • Complete set of pliers
  • Wire cutters and awl
  • Spanners
  • Clamps, Bolts, and Nuts
  • Washers
  • Complete set of socket wrenches
  • Complete set of flat-head
  • Phillips screwdrivers
  • A multi-meter
  • A drain pan
  • Jumper cables
  • Roadside flares
  • Duct tape
  • 3 quarts of oil
  • Can of tire infiltrator
  • Flashlight and bottled water
  • A gallon of anti-freeze

You can buy the kits from an auto parts store.

7. Ventilation, Filtration and Fuel Leakage

To prevent the breakdowns of air conditioners and filters, you must check your car’s ventilation and filtration systems before taking it out onto the road. It would be best if you had automotive air conditioning for comfort and ease of journey. The automotive air filters free your engine from foreign particles that may cause blockages to the car engine and the consequent breakdown.

Sometimes, fuel may become volatile because of the changes it requires to undergo changes in form, from liquid to gas. Fuel leakage may cause a breakdown, or the car may not function up to its anticipated performance. Check the hoses and replace them if you find any defects.

8. Small but Important: Key and Cap

Being too small in size and because of its ease of mobility, the car key may be lost, misplaced, or even stolen. If any of such eventualities happen on the way, you will be completely stranded. One way to avoid such a situation is to keep a duplicate car key with a reliable person accompanying you.

You can designate a person as a critical tracker who will be responsible for tracking out misplaced or lost keys. The fuel caps, being very small and mobile, are most likely to be misplaced. Keep the cap clean and ask the critical tracker to take care of the cap.

9. Driving in the Winter Season

Driving in Winter Season

Photo Credit: https://onlymotors.com/avoid-seasonal-car-problems/

The following are the winter driving tips that have to be followed to avoid any car problems. Check the following:

  • Electrical system that covers battery, ignition, and lights
  • Brakes and tires: use snow tires and chains on all four wheels when you expect severe rainfall
  • Exhaust System for leaks
  • Heating and Cooling System that includes radiator, defroster
  • Windshield Wipers
  • Fuel, filling the fuel tank completely

10. Take to a Mechanic

Take to a Mechanic

Photo Credit: http://www.gearheaddiva.com/1586/10-most-common-car-problems-drivers-can-avoid/

Take your car to a mechanic before you start your road. He will have the thorough check set right if any defect is found.

Important Maintenance Tips for Your RV

The following are the tips for maintaining your RV:

  • Lubrication of hinges, slides, locks
  • Tightening of parts attached outside
  • Cleaning off the dirt and grit that cause wear
  • Tires are to be correctly inflated
  • Tanks are to be often sanitized by using Borax or cologne water softener
  • Lights to be checked for marker and signal lights
  • Seals and Seams: any cracking or holes on the roof are to be checked
  • The voltage of the leading coach batteries should be checked and maintained from 12.4 to 12.8 volts when not charged
  • Look underneath the RV for any items hanging or dangling after being broken
  • Check the propane, smoke, and carbon monoxide sensors regularly.

Whether driving on the road or the now, your car needs to be checked for the same features as your car except the need to put the chains or radials while driving on a snowy path, just as car an RV too is an assembly of different parts and needs regular attention to keep it in order.

What I Wish I Knew About DVLA Number Plates One Year Ago

Written by Chris in Cars

There is a lot of information out there about DVLA number plates. The only problem is that most of this information is not true. In fact, the options for personalized number plates are so varied that it is very difficult to determine what is true. Here are some of the things I wish I had known about number plates just a few years ago – as brought to light by Plateman Show Plates (Website no longer available)

  1. Registration Numbers Can’tbe Rearranged

Most people seem to think you can rearrange registration numbers to arrive at a certain word or phrase. This notion couldn’t be further from the truth. The DVLA has very strict rules regarding the appearance of number plates and how the numbers and letters that make up the plate can be arranged. If you change the arrangement of the registration numbers, you can be fined up to £1000, and your car will fail the MOT if you drive with the rearranged number plate.

  • Buying Private Plates

You may have seen a lot of places that claim to sell personalized number plates, but only a fraction of these can actually sell you legal, personalized plates. When buying or even selling personalized number plates, it is advisable to use one of these companies, simply because they can make the whole process easier. But you want to make sure that you’re choosing a reputable service that can actually deliver on its promises.

  • You Can’t Get a SpecificNumber Plate

Just because you are buying a personalized number plate doesn’t mean that you can get just any specific number. You might not be able to get your desired number even if the plate has never been issued. This is because some marks may never be issues since the DVLA considers them offensive. So it is highly unlikely that you’ll get the number you want.

  • If your car is stolen, you can get your Number Plate Back

But this only works if your car has been stolen and not been recovered after a year. In this case, you can apply to have the registration number applied to your new car. But even this provision is contingent on the fact that you reported the car’s theft to the police at the time it was stolen and that your insurance company has written a letter to the DVLA stating they have no problem with re-issuing the number plate. Once these two conditions have been met, you can then write a letter to the DVLA making your request. The letter should include your name, address, and car registration.

Best Truck Toolbox: Keep Your Tools Safe While On The Road

Written by Chris in Auto Parts,Reviews

Best Truck Tool Box

There’s nothing practical about having your tools rattling around the bed of your truck, no matter how useful the truck is. Leaving your tools out in the open is considered dangerous and inconvenient, especially if you are repairing your truck. The good thing is that there are a lot of toolboxes that you can purchase so you can store your tools safely. This article is here to help you decide on the best truck toolbox available right now.

A truck toolbox has a lot of benefits, such as storing small parts that require safe transportation. It also ensures there is plenty of storage space for your extra stuff, and it gives added security to the truck’s back bed. It keeps thieves away through the locking mechanism, and it ensures the availability of tools when needed. There are many advantages of having a toolbox, and we are here to help you decide which one to buy.

Product (Amazon Links)Brand  

Giantex Aluminum Trailer Tongue Tool Box

Giantex

Review

Dee Zee Specialty Series Narrow Crossover Tool Box

Dee Zee

Review

Best Choice Aluminum Tool Box Tote Storage

Best Choice

Review

48-Inch Aluminum Truck Underbody Tool Box RV ATV Trailer Storage

STKUSA

Review

Topeakmart 24″ 28″ Truck Tool Box

Topeakmart

Review

Things To Consider Before Buying Tool Box For Your Truck

The investment you make in purchasing the best truck toolbox is one you will absolutely not regret. Below is a list of the things you have to take into consideration before buying.

1. Style

Truck toolboxes come in two main styles: the chest and the cross box. The cross box, also known as the crossover toolbox, is the most common type. It is very convenient and easy to use because it crosses over from one side of your bed rails to another one. This toolbox normally has a single lid, and it can open up and back towards your rear window. The ease of use and convenience of this offer make this type of toolbox a great buy.

2. Security

If you wish to also keep your valuables inside the truck toolbox, your best choice is a top-of-the-line toolbox that has strong latches. It should also have a reinforced lid and secure sidewalls. You also have other options if you just wish to protect your tools from external elements such as harsh weather and moisture.

3. Weather Resistance

A lot of truck toolboxes do a great job when it comes to sealing out rainwater. The exterior should be made with high-quality materials that can withstand harsh weather, such as strong winds, snow, and sand. You have to get one that has durable hinges and latches.

4. Convenience

We all know that a simple box can hold all your tools. What the best truck toolbox offers is the ease of opening and closing that will either make or break your decision to get one. Simply put, a high-quality toolbox should have a lock that operates smoothly. For example, if you need to exert extra force for you to open and close the toolbox, it might not have the convenience we are all looking for.

Another thing to consider is the gas lift. It should open the lid quickly, and if it does not, something might be wrong with it. Lastly, the closing force should be very light. If you have to exert an extra push to latch the lid, consider buying another truck toolbox.

5. Material

Nothing will beat a truck toolbox made of steel due to its security and strength. You just have to be careful because once you scratch the paint, you will be dealing with rust from then on. Aluminum tool boxes are also popular because they do not rust. It weighs nearly 50 pounds less than a steel one. However, if you are on a budget, consider buying a truck toolbox made of plastic.

6. Size

AD

Another thing to take into consideration is the size of the truck toolbox. Will it fit the bed of your truck properly? If it is the right size, it is assured that it will be very easy to install into your truck bed. It normally takes less than 15 minutes for one person to mount it in the truck bed. In addition, if your toolbox is lightweight, it will be easier for you to work with the tools inside.

7. Price

As mentioned above, if you are protecting your valuables, you got to have the necessary budget to buy a top-of-the-line toolbox. You have to review each and every feature so you can decide if it makes great value for the price you pay. If you are on a tight budget, there are other cheaper alternatives that can offer you the same features as the expensive ones.

8. User Reviews

One way to determine which one to buy is to read user reviews you can find online. By doing this, you can have an idea of what actual buyers think about the product you are about to purchase. It is always better if you can learn more about the product through first-hand experiences. It is also a great avenue for learning how long a product will last and, if you’re lucky, some of its advantages and disadvantages.

9. Accessibility

Being able to get ahold of your tools whenever needed is also an important factor to consider. In cases of vehicular emergency, especially those that require immediate attention, obstacles should not bother you when you access your toolbox. You have to consider choosing a truck toolbox that has a lid that is very easy and convenient to open and close.

10. Storage Space

You will find this feature extremely helpful if you have a lot of tools. Having a large storage space can definitely make a difference, especially if you also wish to store your personal belongings inside the truck toolbox. You will find below some products whose storage space will benefit your needs.

Top 5 Truck Tool Box Reviews

In this section, I will be discussing the top five recommendations for the best truck toolbox. You will find here each product’s key features, pros, and cons that will help you narrow down your choices for better decision-making. If you are having a difficult time deciding, we hope we can help you through the list below.

1. Giantex Aluminum Trailer Tongue Tool Box

AD

The Giantex Tool Box is designed primarily to save space, providing additional storage under the truck bed. The material is made of sturdy aluminum tread, which means that it is not prone to rust. It also has a weather-resistant sealed door, and it comes with a heavy-duty hinge. It is fully welded, has a lock with two keys for extra security, and opens upward.

This toolbox is designed to fit in front of an A-Frame-style trailer. It features an Offset gas spring lid that allows you to lift the lift easier for loading as well as unloading. It is also weather and leakproof as it seals out dust and moisture. The product’s dimensions are 16x 29x 18 inches, and the item’s weight is 18.3 pounds.

Pros:

  • Heavy-duty and well-built
  • Has space-saving features
  • Made from rust and weather-resistant aluminum tread
  • Offers additional security
  • Gas spring lid makes it easy to load and unload tools

Cons:

  • The box may be too thin
  • Just OK quality

2. Dee Zee Specialty Series Narrow Crossover Tool Box

AD

The Dee Zee Tool Box is constructed of durable Brite-Tread aluminum that makes it rust and weather-resistant. It has a black tread powder coat that gives it a glossy black finish while protecting the tools from oxidation. It also has lockable push-button handles and dampened gas shocks. In addition, it has a closed-cell foam gasket and self-adjusting strikers.

Another great feature of this toolbox is that it comes with bolt-mounting hardware. You won’t have to worry about getting other tools to mount your toolbox. It features a narrow profile that is space-saving. The product’s dimensions are 72 x 15 x 13 inches, and the item’s weight is 24.6 pounds.

Pros:

  • Lightweight
  • Coat is black tread powder
  • Features lockable push-button handles for easy loading and unloading
  • Offers closed cell foam gasket that resists external elements
  • Sturdy and durable
  • Material is made of brite-tread aluminum

Cons:

  • May only last for five to six months

3. Best Choice Products Aluminum Tool Box Tote Storage

AD

The Best Choice Products Tool Box is one of the largest toolboxes among the top five picks for the best truck toolbox. It is durable, weather and rust-resistant due to its aluminum construction. It is perfect for use on ATVs, job sites, cars, truck beds, and trailers. It is made from a heavy-duty aluminum tread plate and features a bright finish. Its door can endure harsh weather, and its hinges are heavy-duty.

Its fully welded exterior ensures a durable toolbox you will never regret buying. It also comes with a lock and a pair of keys for extra security. Product dimensions are 48.75 x 15.25 x 15 inches. As mentioned above, it also has a large storage space for your tools. You can even store your personal belongings with your tools, and there will still be space available for other items.

Pros:

  • Large storage space
  • Durable
  • Weather and rust-resistant
  • Features a bright coating
  • Made from sturdy aluminum
  • Comes with a lock and two sets of keys

Cons:

  • The aluminum exterior may be too thin for some

4. 48-Inch Aluminum Truck Underbody Tool Box RV ATV Trailer Storage

AD

The STKUSA Tool Box is another great product if you need a larger storage space. It is made from a bright aluminum plate that makes it sturdy, rust-resistant, and weather-resistant. It also features a sealed door that can endure harsh weather and environment, and its hinges are heavy-duty. The toolbox already comes with a lock and two keys for extra security.

Product dimensions are 48 x 15 x 15 inches, and item weight is only 32 pounds. With its size, it can accommodate more of your tools, as well as your personal belongings. Together with its security features, it is assured that it will keep thieves away.

Pros:

  • Made from sturdy aluminum
  • Weather and rust resistant
  • Hinges are heavy-duty
  • Features a large storage space
  • Offers extra security due to its lock and two sets of keys

Cons:

  • The lock might be defective upon delivery
  • Did not hold up well for some

5. Topeakmart 24″ 28″ Truck Tool Box

AD

The Topeakmart Tool Box is strategically designed to save space and to provide additional storage through its under-vehicle mounting. It is constructed of heavy-duty five-bar tread aluminum plate for outstanding durability and the exterior is a bright finish. In addition, the Topeakmart features a weather-resistant rubber seal that will ensure that all the items inside are safe and dry.

Another great feature of this toolbox is the built-in lock that makes sure that all your tools and belongings are kept secure and safe. Also, it comes with two heavy-duty hinges situated inside the box. The lock comes with a secure cap that will keep moisture and rust from entering the insides of the toolbox. The product’s dimensions are 23.5 x 18 x 16 inches, and the item’s weight is 19.3 pounds.

Pros:

  • Lightweight
  • The material is made from aluminum
  • It is durable and has a bright finish
  • Features weather-resistant rubber seal
  • Has a built-in lock with two heavy-duty hinges
  • The lock has a protective cap

Cons:

  • The aluminum exterior is thin
  • May not last long due to its thin material

Conclusion

If you are having a hard time picking which one to buy, worry no more. In my opinion, the best one to purchase is the Topeakmart Truck Tool Box because it outweighs the pros of the other products. Judging by its key features, it really stands out from the rest. It is also worth the purchase, and you surely will not regret buying it.

Are you also looking for other accessories to hook up your vehicle with? Click here to check some of the products that are available in the market right now.

Best RV Dehumidifier: Making the Right Choice

Written by Chris in Auto Parts,Reviews

Best RV Dehumdifier

Traveling and camping in an RV is a rewarding experience. At times, it can also be frustrating. One of the possible culprits for the latter is humidity, which can be a result of fluctuations in temperature, cooking, and showering, among others. This can lead to damp air, which can damage the RV and can lead to a variety of health problems as well.

Among other appliances for your motorhome, one of the most important is the best RV dehumidifier. With the abundance of the alternatives, however, which one can provide the best bang for the buck? If you are clueless on what to choose, keep on reading the rest of this post and we will help you to come up with the right decision.

Product (Amazon Links)Size  

Pro-Breeze PB-02-US Electric Mini Dehumidifier

16 oz

Review

Ivation IVADM45 Intelligent Dehumidifier

25 oz

Review

Hysure Portable Mini Dehumidifier

16oz

Review

Choosing the Best RV Dehumidifier

Below are some of the things that should be carefully considered as you try to evaluate the options that are available in the market.

1. What Type Suits Your Needs?

One of the first things that you should do is to determine the type that is suited to your needs. Most of the options, especially those that are used at home, are refrigerant dehumidifiers. It works by condensing moisture from the air.

The second type is known as a desiccant dehumidifier. In this case, there is a water-absorbent desiccant where the air passes through after being pushed by a rotor. They are smaller in size and will work only if you need to take out moisture in a specific part of the RV and not for the entire motorhome.

2. What Size Do You Need?

There are different factors that will have an impact on the size of the dehumidifier. Think about the size of your RV, which will help to determine the right size of the dehumidifier that you will choose. If the RV is bigger, this obviously means that you will also need an appliance that is larger to be efficient in taking out moisture from the air.

When it comes to size, aside from taking a look at the physical dimensions of the product, you should also think about the size of the tank. For an RV, up to 30-pint capacity will be good. With this, it will take a long time before there is a need to empty the tank of the dehumidifier.

3. What Features Does the Dehumidifier Have?

AD

Among others, you should look for features that will ensure the safe operation of the dehumidifier. One of the most important is to have an automatic shutoff, which will prevent overheating. To add, there should also be a feature to prevent tilting, which will make it stable.

There should also be a feature that will automatically detect the level of humidity in the RV. Most products have a digital display, which will show you this information. It will also allow the unit to turn off on its own once the optimal level is reached. This is good because it will minimize energy consumption.

Having adjustable louvers can also be great. This will allow you to have complete control, making it possible to direct airflow.

Another good feature to have is a blinking light or LED notification. This will let you know in an instant if the tank is already full and if there is a need to have it emptied. It will be a good way to prevent mess and to ensure the optimal functionality of the dehumidifier.

For portability, it would be great if the dehumidifier came with handles and wheels, making it easy to move. Nonetheless, because an RV is quite small, this is not much of a concern.

4. What about the Noise?

Another thing that you should look at is the level of sound that is produced by the dehumidifier as it operates. This technical specification is expressed as dB or decibel. The higher the number, the louder the dehumidifier is. This can be a significant disruption, especially if you are sleeping in your RV. Some have innovative technologies that allow them to deliver whisper-quiet operations. You can barely notice that the dehumidifier is there.

5. What is the Warranty?

For your peace of mind, look for a product that comes with extensive warranty coverage. The standard is one year. Others are offering more than one year if they are really confident of the quality and functionality of their product. Within the warranty duration, they will provide free repair and replacement of parts if the product proves to be defective in any way.

There are also some products with a money-back guarantee, usually for a period of 30 days. This means that within a month, if you are unhappy in any way with the performance of the product, you can return it to the manufacturer, and they will issue an unconditional refund.

Top Picks for the Best RV Dehumidifier

If you are finding it hard to decide on which one will make the best choice, in this section, we will provide you with a glimpse at three of the products that can prove to be promising.

1. Pro-Breeze Electric Mini Dehumidifier

AD

This is another option that is perfect if you are looking for a dehumidifier that comes with a compact size. To add, it does not only have a sleek profile. Make sure to include this product at the top of your list.

The Ultra-Quiet Peltier Technology is one feature that you will also appreciate about this product. With the latter, you can expect whisper-quiet operation from the dehumidifier. This is great as it will never be a disruption, even if you are sleeping.

In terms of specifications, it is not comparable to larger models. Because of its size, expect that its performance will not be at par with the bigger dehumidifiers. It has the ability to remove up to 9 ounces of moisture in a day. It is incorporated with a tank that has a capacity of 16 ounces.

Pros:

  • Space-efficient design, making it perfect for RVs
  • Operates quietly

Cons:

  • Can be quite slow in the removal of moisture
  • Removes minimal moisture

This is the perfect option if you are looking for a product that comes with a good  To add, given the fact that the tank has a capacity of only 16 ounces, this will also be great in terms of space efficiency.

2. Ivation IVADM45 Intelligent Dehumidifier

AD

One of the best things about this product is that it comes with Auto Humidistat Function, which is basically the one responsible for making it an intelligent appliance. This will allow you to set the humidity level that is desired and will prevent putting energy into waste.

At its size, it is perfect for spaces that are up to 2,200 cubic feet. This is more than enough for most RVs. To add, it also comes with a removable water reservoir, which has a capacity of two liters. Some people might think that it is quite small, but given the fact that you will use it for an RV, this should be more than enough.

Lastly, it is also a good thing that this product comes with Advanced Peltier Technology. This means that there are no moving parts in the product. Aside from reducing the need for maintenance and prolonging its functional life, this is also the reason why it operates quietly.

Pros:

  • The compact size makes it perfectly fit in RVs
  • Operates without creating an annoying sound
  • Has an intelligent functionality that makes it user-friendly

Cons:

  • Does not come with a hose or filter

It comes with a compact body that is perfect for many RVs. It will work effectively in larger areas without taking a lot of space.

3. Hysure Portable Mini Dehumidifier

AD

Investing in a dehumidifier does not need to cost a fortune. This product is an ideal option for your consideration. It also comes with a compact design. It is one of the smallest among the products that we are reviewing in this post.

It may not be the biggest of the group, but it can handle small spaces.  For instance, take note that it comes with minimal capacity. The small tank means that it will not be able to pull out a lot of moisture in the air.

Despite the minimal performance, there are many features that will make it impressive. For instance, it has Peltier Whisper Technology, which is basically the one that is responsible for making it operate quietly. It also turns off automatically on its own. In addition, there is an indicator light that will provide immediate notification when tank capacity has been reached.

Pros:

  • One of the most compact dehumidifiers for RV
  • User-friendly features
  • Quiet operation

Cons:

  • Minimal dehumidifying capability
  • Lacks power and performance

If you are looking for a product that comes with a compact size, this is a nice choice. However, with its small tank, do not expect it do big jobs.

Conclusion

What is the best RV dehumidifier that is available in the market? From the three products above, if there is one that I can personally recommend, it would be Frigidaire 30-Pint Dehumidifier. Given its features, it will provide the best bang for the buck. It is powerful, user-friendly, and energy-efficient.

Are there other products that you need for your RV? Click here and read some of our guides that will help you to come up with a well-informed decision.

How To Detail Your Car Like A Professional?

Written by Chris in Cars

How To Detail Your Car Like A Professional

Detailing your car is not a very difficult job to do at your home. Car detailing is an art that every one of us loves to do the art for the car because the car is a major need in day-to-day life, which implies luxury and heads up your status.

The car plays a vital role in improving your status; of course, the car is a basic need that helps promote your lifestyle. Everyone wants his or her four-wheelers to be unique and trending. Therefore, we use them to paint and stickers for our cars.

There are some basic things required to locate our car. However, buying a car for a luxurious life is not enough. To maintain car by keeping it clean and neat is the primary thing when it comes to car maintenance. There are some basic steps to clean your car and car materials.

Sometimes, we might fall into confusion about where to begin your car cleaning process. How long you are spending time on your car is very much worth improving your car. By this, your car looks excellent. Spending your time cleaning gives your car a lavishing look.

There are two main extreme steps to clean your car. They are the interior cleaning and the exterior cleaning. There are some best car dusters. They are Jopasu, auto furnishes, car cleaning dusters, and spinning goes dusters.

detailing your car

Photo Credit: https://blog.nationwide.com/diy-car-wash/

Basic Things You Need for Car Cleaning

  • Two buckets
  • Hose
  • Car cleaner solution
  • Bug and tar remover
  • Glass cleaner
  • Wash mitt
  • Soft bristle brush
  • Plastic brush

Interior Cleaning Process Step-By-Step

detailing your car

Photo Credit: http://metrocarwash.com/10-tips-to-clean-and-detail-your-car-like-a-pro/

1. Vacuum Cleaning

Vacuuming your car interior helps to keep your car looking very newer. In this step, the most important thing is that we need to select a suitable vacuum cleaner. It should be especially for your car cleaning and perfectly designed. The vacuum cleaner should have the special features of some attachments, which help the cleaner to reach all the tiny and small areas.

Before vacuuming your car, remove all the floor mats from your car. It makes your cleaning process fine. After that, you can start vacuuming grim areas. You can clean carpets, fold seats, under-the-seat areas, and every nook and corner of your car. Mainly vacuuming the sides of windows is the major cleaning process. You can find more dirt and dust on these sides.

Use a duster to remove some little tiny dust. Then, use a bristle brush that helps you to remove the heavy dirt from the hidden areas. After finishing everything, once again, re-vacuum the small dirt. Now, you can see greasy dirt in the areas of A.C. switches, hand brakes, seat creases, and vents.

2. Upholstery Cleaning in the Car

Using upholstery in the car is a quick vacuuming job. This cleaning method includes carpeting, cloth fabric, rubber, and plastic-lined interiors. Upholstery is mainly used under the seated areas, which are meant to be very tight and heavy areas that do not allow the dirt to be removed. Some fibers used in this stick up very heavy dirt that is difficult to remove. Shampooing is used to clean all the dirt.

3. Cleaning your Car Leather

Cleaning your Car Leather

It is very important to note that you should not use water, cleanser, or any conditioner to clean leather materials in your car. There are some simple ways to clean your leather. Spray cleanser onto your materials and use soft bristles to scrub the leather. Always use the conditioner that suits your seats, which means a PH-neutral conditioner. It is good for your seats. It gives you a professional touch to your car seats. After all, this process uses the microfiber cloth to wipe up the conditioner left over on the seats.

4. Deodorizing your Car

After all, the methods to clean your car interior are very important to remove the bad odor. It is possible because of the chemical solution used in the car and very much needed for the smokers, which the deodorizer removes the smoking odor or any other smell.

After finishing interior cleaning in your car, use interior trims like trimming dash boxes and water bottle placing areas. The next step is to clean its exterior.

Exterior Car Cleaning Process Systematically

Exterior Car Cleaning Process Systematically

Photo Credit: https://www.youtube.com/watch?v=UaliWjVKwnA

1. Washing

For washing your car, the very first basic material you need is two buckets. It contains one with soapy water or some car cleaning solution used water and another bucket with clean water. There are several steps to clean your car body

2. Cleaning your Wheels

The wheels and tires are directly exposed to the ground surface. When something is exposed to the ground level, obviously, it leaves some space for the dear near dirt to settle over them. A wheel in a car should be handled properly because of locomotion.

The wheels are common, and the dustiest dirt is situated area in the car, so first brush the wheels of your car. To brush the wheels of your car, use a skinny- soft brush. It helps to clean all the wheels and open the wheels. The best step is to use the sponge or mitt to clean the wheel.

3. Mitt Washing

Use a mitt to wash your car for scrubbing the surface of the car, soak the mitt because mitt helps to clean the car without any scratches or damages. If you use the brushes, it will cause some scratches on your car body.

Now all these sections are finished. Rinse your car with clean water. Then use the hose at the bottom of your car and use the plastic brush.

4. Waxing and Polishing

Remove The Rust

A car must also have a good and shiny look over it. Cleaning the car alone is not enough. Rather, it must impress everyone and should grab the sight of young men and women.

After cleaning the car, dry your car with a towel. After that, leave your car to dry. The wax helps to give your car a polished look. Apply wax on the black car. Use the plus wax in particular areas that you need waxing to look fine and clear.

5. Glass Cleaning

Clean the window glasses with glass cleaners or water repellent. Apply the glass cleaner and use the paper to rub it, then add water to clean it. Then add water to clean it, and after that, rub it with a soft towel or with soft paper.

6. Bug and Tan Remover

Using bug and tan remover helps to restore the color of your paint and prevent it from becoming dull. All you need is to spray it on the surface and wipe it up after one minute. Use the best brand to give a perfect look to your car

7. Remove the Scratches

It is very important to remove the scratches from the car that gives your car a new look.

These are simple ways that help to detail your car at your home. Now, you guys, these simple instructions are meant for you, so try this at your home and save your money from car servicing.

For this, you need to spend your time. Always keep in mind not to cross the contaminated surface in your car. Use the correction by paint you need. Making sure to follow these steps gives you a professional car detailing look to your car.

Best Motorcycle Jack: An Essential for Maintaining your Bike

Written by Chris in Motorcycles,Reviews

Best Motorcycle Jacks

Riding your motorcycle, without a doubt, is a lot of fun. It is a liberating and thrilling experience. To be sure that you will stay safe and immediately address any apparent problem, it is important to invest in the right tools. With the latter, it will be easy to diagnose a problem and quick to have it resolved.

Among others, one of the tools that you should have is the best motorcycle jack. This will allow you to easily lift the bike and to have it inspected or repaired as necessary. It is similar to the jacks designed for cars, with the difference being that it can handle lighter loads since it is for motorcycles. Whether you are just a motorcycle hobbyist or a pro repairman, you need to have this in the garage.

Product (Amazon Links)

Brand

Goplus Hydraulic ATV / Motorcycle Jack

Goplus

Review

OTC 1545 Motorcycle Lift

OTC

Review

Torin T64017 Motorcycle Jack

Torin

Review

Black Widow BW1604A Motorcycle Jack

Black Widow

Review

Pit Pos​​se PP2551S Motorcycle Jack Lift

Pit Posse

Review

Essential Considerations for the Best Motorcycle Jacks

In this section, we will give you a quick look at some of the most important factors that will have an influence on the decision you will make.

AD

1. Make Sure it is Easy to Use

Among others, one of the most important is for the jack to be user-friendly. Similar to the other items that you have in the garage, it should be straightforward to use. It will also be good if the manufacturer provides detailed instructions on how to make the most out of the product.

For the motorcycle jack to be easy to use, it needs to be a hydraulic system and should come with a foot-operated pedal. With this, the pressure that is exerted on foot will lift the motorcycle at the desired height.

2. Pay Attention to Safety Features

For sure, you have already heard of stories about mishaps in the garage while repairing motorcycles. They can cause serious injury, and worse, even death. With this, pay attention to the safety features, which should also provide you with peace of mind.

The base should be stable on the surface. If it is moving, there is a tendency that it will trip. To add, there should also be secured straps to be sure that the bike will stay in your place as you perform diagnostics or repair.

3. Know about the Different Types

To make it easier for you to narrow down the possibilities, it will also be important to learn about the different types that are available. You should also be familiar with the pros and cons of each type, which will make it easier to come up with the right decision.

Hydraulic jack is the more popular option, which also happens to be user-friendly. It requires lesser effort on your end, most of which can be operated through pushing the pedal with the use of their foot.

A more traditional alternative, on the other hand, is the scissor motorcycle jack. They have a crisscross pattern that supports the top when it is lifted. This is the option that is recommended for budget-conscious buyers as this is generally the one that is more affordable.

4. Think About Size and Capacity

AD

Think of the size of the room where it will be placed. Make sure that it will perfectly fit while still providing you with ample amount of space to move. In the same way, consider the size of your bike as well. Most of the options that are available in the market can have a weight capacity that ranges from 1,000 to 2,000 pounds. Follow the weight recommendations from the manufacturer to avoid safety issues.

5. Look at the Materials Used

Like other products, the materials that are used are important because they will have an impact on durability. In the case of motorcycle jacks, aluminum and steel are some of the most common materials. Be sure that the material is lightweight so that it can be easy to move around. In the same way, it must be strong enough so that it will remain in its peak condition even after a long time of use.

6. Consider Warranty from the Manufacturer

To have peace of mind, look for a product that comes with an extensive warranty coverage. Most of them will have a warranty that lasts for one year. It is better to opt for products with two years of warranty or longer.

Within the warranty period, if the motorcycle jack becomes defective, you can return it to the manufacturer. Provided that you have abided by their terms and conditions, they will repair it for free or replace the parts that are defective. This is one way of making sure that you will be provided with the best bang for the buck.

Reviews of the Top Choices for the Best Motorcycle Jack

Clueless about which one will make the best choice? If you are having a hard time deciding on which one to purchase, below are some of the options that you might want to consider.

1. Goplus Hydraulic Motorcycle Jack

AD

User-friendly – this is perhaps the main reason why this is one of the favorites within the product category. The latter is designed with simplicity in mind, especially given the fact that it comes with a hydraulic pump that can be activated by the foot.

The weight capacity of this jack is also impressive. This has the ability to support the weight that is more than 1,500 pounds. The latter means that you can use it even for a heavier motorbike without worrying that it will collapse.

If you are worried that the sides of the motorcycle will end up being damaged or scratched, this jack is designed with a rubber saddle. The latter reduces friction on the surface, and hence, making sure that your bike will not have scratches.

Pros:

  • Has a generous weight capacity
  • Solid construction, which makes it durable
  • Has a pump that is designed to lift your bike easily
  • Safety lock keeps the bike in a secured position as you work
  • Has a feature that will prevent the possibility of overloading

Cons:

  • Swivel wheels can be quite hard to maneuver
  • May not support loads for an extended period

I personally recommend this if you are looking for a motorcycle jack that comes with user-friendly features and one that does not compromise safety in any way.

2. OTC 1545 Motorcycle Lift

AD

Among other things, the stability of this motorcycle jack is one thing that is worth commending. The latter will make sure that it will not move while you are working on basic repairs. Also, because it comes with wheels, you will also enjoy the freedom to easily move it from one place to another, depending on where you intend to have the work done.

The saddle lifting platform is one of the best parts of this jack. The latter has a length of 17 inches and width of 14.5 inches. With this, it will be exceptional in terms of the even distribution of the weight of your motorcycle. There are also ratchetting straps that will allow you to conveniently secure your bike.

Lastly, this jack is made from an aluminum body. Although the latter is lightweight, it is a good thing that it can support up to 1,500 pounds of weight.

Pros:

  • Equipped with a foot pedal for easy lifting
  • Comes with an automatic lock
  • Designed with a convenient and removable handle
  • The manufacturer is offering two-year warranty
  • Easy to use even for first-timers

Cons:

  • There is no speed control for retraction
  • Bolts may have problems when being trodden

With its generous weight capacity and foot pedal system, coupled with the fact that the manufacturer is offering warranty for two years, this is another option that is worth taking into account.

3. Torin T64017 Motorcycle Jack

AD

This products we are briefly reviewing in this guide .

One of the best things about this motorcycle jack is that it can offer versatility. The latter is due to the fact that there are six locking positions. This will allow you to position your bike in different ways while providing you with the assurance that it will stay secured.

To add, it is also worth noting that it has a capacity of 1,500 pounds. Given its space-efficient size, the lifting capacity is quite impressive compared to many other options that you can find in the market.

Pros:

  • Lightweight and easy to maneuver in different areas
  • Space-efficient, making it perfect for small areas

Cons:

  • Assembly right out of the box can be quite tricky
  • Lacks durable construction

I am personally recommending this option for anyone who is looking for an economical option for a motorcycle jack.

4. Black Widow BW1604A Motorcycle Jack

AD

This is another option that can prove to be an excellent pick for many buyers. However, expect that it will be devoid of high-end features that you will commonly might find in higher end brands. For instance, its weight capacity is only 1,100 pounds.

If you want a jack that can be installed permanently, this is one product that you will not regret choosing. While it can be portable and will allow you to work in different areas, you also have the option to assemble it in a permanent location. There are two pre-drilled brackets that will allow you to easily screw it on the surface.

The rubber platform is also a plus. This means that the surface where the bike will be placed is protected from abrasives. This will give you peace of mind knowing that motorcycles made from chromed frames will not be easily prone to scratches.

Pros:

  • Steel construction for durability
  • Has a simple design that makes it easy to use
  • Can function for a long time without the need for heavy maintenance

Cons:

  • Weight capacity is a bit minimal
  • Manual operation makes it require a bit effort

This is an option for a motorcycle jack that offers the possibility of having it permanently installed in the garage or workshop.

5. Pit Posse PP2551S Motorcycle Jack Lift

AD

The space-efficient design of this motorcycle jack is one of its most impressive features. Even if the garage or workshop is small, you can add it without worrying about the amount of space that it will consume.

It may not be as popular as its higher-end competitors, yet this is another option that I personally like. It is designed with safety loops and pins, providing you with the guarantee that the bike will remain stable in its position. Safety is less of concern for you because of these features.

Lastly, it is made from a heavy-duty steel frame. The material can be quite heavy, but it does not fail to be impressive when it comes to its durability. Even after a long time, you can be confident that it will be able to deliver a reliable performance.

Pros:

  • Sturdy construction will make it last for a long time
  • Easy to secure your motorcycle in its place
  • Consumes minimal space in the work area

Cons:

  • Not as popular as the previously mentioned
  • Casters may be quite difficult to roll

This is a great choice if you are looking for a long-lasting motorcycle jack, which is made possible by the use of steel frame.

Conclusion

In sum, from the five products that we have briefly discussed above, if there is only one that I can personally recommend, it would be OTC Hydraulic Motorcycle Jack. The latter comes with a high-weight capacity and several safety features, which will allow you to work with peace of mind. To add, its operation is also pretty much straightforward, which makes it great even for novices.

Are you looking for other products for your motorcycle or garage? Click here and we will let you know how to choose the best.