Are you looking for the permanent way to restore LED headlights? If yes, then this guide can be very helpful for you. Here you would know how to restore headlights perfectly. What to do if my headlights don't turn on?
Headlights start to fade over time. This faded headlight offer less amount of light, and you may find it very difficult to drive at night with this less amount of light that the faded headlights make out. You should be aware of it as sometimes it may be dangerous and difficult to drive at night.
Your headlights may begin to fade over time due to oxidation on the lens. Sometimes oxidation takes place, and it degrades the lens of headlights quickly as polycarbonate is a porous material.
Well, there are lots of ways to restore the headlights by removing oxidation. Wet sanding can also be a very safe and good option to restore your headlights to a normal and safer condition. People have to Install LED headlights just due to existing faded headlights, but you can try some techniques to restore your old lights.
We have been restoring headlights for a long time by using some safe methods which can prove effective, so we have suggested the same in this guide. We feel this important and useful information should be passed to our readers. You can check the process below:
What do you require to complete the process of restoring headlights?
You require some important things including shop towels, microfiber cloth, rag, a small towel, sand paper, automotive masking tape, 3M rubbing compound, a Drill, spray bottle with water, compound pad, rubbing alcohol and measuring cup, spirit and much more.
You have to get everything prepared or ready for the further process. You should add water and a little soap to spray bottle to keep the headlights lubricated. You should cover up the area around your faded headlights that you want to restore. You can cut your sand paper into ¼ sheets.
Take the 800-grit sand paper and place it on the headlight and spray it with a water bottle. It will stick to the headlights by itself. You can start sanding the headlight slowly. You should continue sand and wipe the surface using a towel. It helps remove oxidation. Now you can switch to the second step.
You have to finish 800 grit sand papers in one direction; now you can move on to 1000 grit. You have to sand 1000 grit sand paper in the same way as you did with 800 grit. Sanding it in one directing and keep the headlights lubricated to get a uniform finish. You would notice that the headlight would clear up slightly. You can wipe it off and move to the third step.
Once you have finished with 800-grit and 1000-grit, now it’s time to use 2000 grit. This can be a very significant step. You will get better results if you spend longer time on it. You can take this sandpaper and start sanding headlights (do it in one direction).
Again you will get a uniform finish and a clear headlight. You can wipe it off and move to the fourth step. The shine of headlight depends on the grit paper and how well you use it. You can use a microfiber cloth and plastic polish to remove sanding marks and scratches from clear coat.
This is also very important step. You need a drill to attach the compound pad and hook it paid. You can apply rubbing compound on the headlight and use the drill to polish the headlight. It helps spread compound. When it spread, you can turn the drill onto full speed to get the new and shiny headlights.
You can get rid of 2000-grit scratches by using this process. You can also use the more compound and polish the headlight to make it shinier.
Other Methods to Restore Your Headlights
1. Use Toothpaste to Restore your Headlights
Toothpaste and baking soda are easily available ingredients. You can use them to get rid of unclear and fizzy headlights. This can be the cheapest option to restore headlights as you just need baking soda and toothpaste. You can mix both ingredients and rub this mixture into hazy and oxidized headlights.
You can also use an old toothbrush to complete the process. The harder you rub, the better results you get. Let the toothpaste mixture dry for few minutes and wipe it off with warm water and cloth. Your headlight would look clearer. This can be a permanent solution to get rid of hazy lights.
2. Distilled White Vinegar and Baking Soda
This is also a cheap and easy trick to use. You just need some clothes and two jugs. One jug should be filled with baking soda and other with white vinegar. You can pour vinegar into baking soda to make the solution to fizz up. They both have different pH and nature.
White vinegar has acidic nature, and baking soda is alkaline, so it causes the mixture of both to fizz up. You can apply and rub this solution or paste to the headlight. You can use a cloth to rub it properly over headlights. Baking soda acts very well in getting rid of oxidation on headlights.
You have to rub the headlight thoroughly to get the amazing and desired results. You can wipe it off with a clean cloth and apply wax over it to make it look shiny and new.
You need to polish it or wax it to get clear light. You can leave it for some time and take the dried polish off from headlights with a cloth. You will enjoy the new clarity and shine of restored headlights. These are some easy tricks that you can try at home without spending a lot of money.
Now, this is the right time to appreciate your hard work. You can have a clean, shiny and nice headlight that helps you see properly at night while driving.
There may be lots of reasons of fizzy and oxidized headlights, but it may be dangerous and unsafe to drive with these lights especially in the night. Here in this guide, we have mentioned all the useful, easy and cheap tricks that you can try and have clean and nice headlights. You can try these tips at home to get shiny headlights. Hope you find this post informative and interesting. Do comment if you have any query regarding the simple and effective process to restore headlights permanently.