{"id":2596,"date":"2017-04-11T02:14:44","date_gmt":"2017-04-11T02:14:44","guid":{"rendered":"https:\/\/drivinglife.net\/?p=2596"},"modified":"2024-01-12T15:33:34","modified_gmt":"2024-01-12T23:33:34","slug":"how-to-shim-a-starter","status":"publish","type":"post","link":"https:\/\/drivinglife.net\/how-to-shim-a-starter\/","title":{"rendered":"How To Shim Your Car Starter Like A Pro?"},"content":{"rendered":"\n

Do you sometimes find it hard to start your car,<\/em> or does it make a noise when you start it? What would be more frustrating than a worn-out and old starter that just would not turn over?<\/em> Do you think about the brand-new starter that will not crank over?<\/em><\/p>\n\n\n\n

If yes, then you should look for the one that engages properly and fit correctly. But remember, a starter is not also responsible for noise; shims may be the main reason behind this. If you start your car without a shim, your car may sound like starter cranks and loud sound.<\/p>\n\n\n\n

You need to use a shim to avoid noises that the starter emits. There may be many reasons for the starter noise, including the starter being too far or too close to flywheel teeth, loose mounting bolts, and much more.<\/p>\n\n\n\n

Many people prefer not to use a shim, but they need to check the clearance of the gear with a wire gauge. You can move gear easily to meet the flywheel by removing the solenoid. You should also use the right starter mounting bolt with knurling that facilitates alignment. But sometimes, the starters require shims to keep the drive gear away from the flex tape gear<\/a>.<\/p>\n\n\n\n

Do you know how to install or use a starter shim?<\/em> When you buy a car and get its engine, you are not informed of whether your starter has a shim or not.<\/p>\n\n\n\n

You can take the cover off to examine the starter and the flex tape. Sometimes it seems impossible to see how gears would line up. You should know how to engage the driver to see the distance. You can avoid loud clunking noise by using a starter with a shim.<\/p>\n\n\n\n

If you don\u2019t have a shim with your car starters, then you should buy a prestigious starter with shims as it can be very helpful in reducing loud clunking sound and getting a smooth sound when you start your car.<\/p>\n\n\n\n

Some starters required shims to provide clearance between the flywheel and the pinion gear. Some people also use flat washers in place of shims. To know about the shimming procedure, you need to know how to remove and install a starter. Here, we have mentioned some steps to remove and install it. Let\u2019s have a look below:<\/p>\n\n\n\n

\n\n\n\n

Starter Removal and Installation<\/h2>\n\n\n
\n
\"Starter <\/picture><\/figure><\/div>\n\n\n

How to Remove Starter?<\/h3>\n\n\n\n